
Loose stucco on a chimney in West Little River, fixed properly
Each part of the job is priced separately, from the base and lath to the finish and paint.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Stucco trouble you can spot from the yard
- Hairline cracks across one chimney face
- Rust spots lined up in rows
- A long crack near the roof line
- A vertical crack where chimney meets wall
Jump to
Getting chimney stucco right in West Little River
Keep a new patch flush with the old plaster
A new patch should meet the old stucco at a clean edge, not spread over it. A thin feathered layer on top of sound stucco has little to grip and tends to flake at the rim. It also leaves a visible halo around the repair.
We cut the edge of the repair area back to sound material and finish the new work flush with it. If the whole face needs a new finish for color, that is a separate decision, and we price it as its own item. You choose whether the patch alone is enough.
Fine stucco cracks and how they are closed
A hairline crack in the finish is often a surface matter. Preservation guidance notes that such cracks can usually be closed with a thin slurry of the finish coat's ingredients. A coat of paint can also close them.
Before treating a fine crack as cosmetic, we check whether the plaster around it sounds hollow and whether the crack lines up with anything behind it. If both checks are clean, the fix can be modest. If not, we explain what else the crack may be telling us.
Why caulk rarely suits a fine stucco crack
Running caulk along a fine crack is a common quick fix. Caulk does not share the texture of stucco, it weathers differently, and it tends to hold dirt. After a while the repaired line can show more clearly than the crack did.
If you or a previous contractor used caulk, tell us. It may need to come out so a mineral repair can bond. Sealant still has a place on a crack that keeps moving, so we first work out whether the crack is active before choosing the material.
A small trial area before a full refinish
Before refinishing a whole chimney face, a small trial area is a sensible step. It shows the texture, the color and how the product bonds to your surface, and it costs little compared with redoing a face.
The International Masonry Institute recommends mockups for coating work. We place the trial where you can see it but where it is not the first thing a visitor notices. You approve the result, or ask for changes, before the full finish goes on. That approval is noted in the written record of the work.
Each part of the stucco job, itemized
- Removal of failed stucco and old patches
- Finish coat texture matched
- Protection for paving and plants
- Debris cleaned up and hauled away
Stucco chimney repair, answered plainly
Can one damaged area be repaired without redoing the whole face?
Often, yes. A defined patch works well where the base is sound and the loose area is limited. We map the hollow zone first. If the color match on a prominent face worries you, refinishing the face is offered as a separate option.
Can you restucco a chimney that has many layers of paint?
Yes, but the paint layers matter. Loose paint has to come off, and a heavily painted surface may need a bonding agent or full removal before new stucco can grip. We test the surface and explain the approach in the estimate.
Should I pressure wash the chimney before you come?
Please do not. High pressure can drive water into cracks and loosen weak plaster, which makes the inspection harder to read. Leave the surface as it is, and we will look at it in its current condition.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo