A chimney top damper fitted properly in Colee Hammock
Your free inspection covers the fireplace, the flue top and the damper you have now.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Top damper problems we fix in Colee Hammock
- Leaves or nesting on the smoke shelf
- Daylight visible up a closed flue
- Rust flakes dropping from the throat
- Plans to leave the fireplace idle
Jump to
How we fit a top sealing damper in Colee Hammock
Fixing the bracket in the firebox wall
The cable ends at a bracket fixed to the inside of the firebox, usually near the front on one side. The bracket is held with anchors set into holes drilled in the firebrick. The maker's instructions call for a masonry bit and care, since careless drilling can crack the brick.
We drill with the right bit, place the holes where the brick is sound and set the anchors firmly. If the firebrick on the chosen side is cracked or loose, we suggest the other side or explain the repair it needs first. The bracket should not work loose after a few pulls.
Upfront pricing for a top damper
The price for top damper work is on the estimate before anything starts. It covers the damper, any adapter or plate, the cable and bracket, and the work to fit them. There are no hidden fees for roof access, drilling or cleanup.
If the old damper or the tile top turns out worse than it looked, we stop and explain before going further. Any added repair is priced separately, and you decide on it. Upfront pricing on damper work in Colee Hammock means the number you approved is the number you pay for what you approved.
What the damper inspection cannot see
From the firebox and the roof, we can see the throat, the smoke shelf, the tile top and the upper flue. Parts of the flue in between, the back of the smoke chamber and anything behind old sealant stay hidden.
We tell you what we saw and what we could only infer. If a hidden condition could affect the damper, such as a crack near the top of the tile, we explain how it would come to light. The written estimate records the limits of the inspection, so you know what was checked.
Checking a damper more often near the water
A damper near the coast faces harsher air than the same damper inland. Published corrosion data for coastal sites names wind speed, the direction the wind comes from and nearness to the coast as factors in how quickly metal is lost.
Let us know if the house sits close to the water, since that shapes how often the damper is worth a look. We note the condition of the lid, hinge, gasket and cable on each visit, so any change over time is easy to see.
Top damper scope, step by step
- Cable route down the flue
- Seal checked from the roof
- Written record of the damper work
- Workmanship warranty on the installation
Questions to settle before a top damper
Will a top damper lower my cooling or heating bills?
One maker's instructions say a closed damper keeps conditioned air from escaping up the flue. We do not promise a savings figure, because that depends on the house and how the fireplace is used. We recommend a damper for fit and function.
What if the cable breaks with the lid closed?
Do not light a fire until the damper can be confirmed fully open and the fault is repaired. A spring-loaded lid may open when cable tension is lost, while a stuck or damaged mechanism may not. We check the model and condition before recommending replacement parts.
What will the written record show after installation?
The damper model and material, any adapter used, how it was fixed to the flue, where the bracket sits and what happened to the old throat damper. It also lists anything we saw but did not repair.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo