
Top sealing damper installation for homes in Flagami
No savings promises, only a damper that suits the fireplace and works the way it should.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper trouble that points to a top damper
- Rain reaching the firebox floor
- Leaves or nesting on the smoke shelf
- Old damper plate stuck part-way
- Plans to leave the fireplace idle
Jump to
What goes into a top damper job in Flagami
Dampers made to sit under a cap
One style of top damper fixes to the top of the flue and is designed to sit beneath a separate chimney cap. The cap keeps rain off and holds the screen, while the damper below it does the sealing.
If your chimney already has a sound cap, this style can sometimes keep it in service. The cap has to leave enough room for the lid to open fully, and it may need to come off during installation. We check the height and clearance under your cap before recommending this route.
The tile top has to be sound
Many top dampers are fixed to the top edge of the flue tile with a high-temperature adhesive supplied by the maker. The bond is only as good as the tile under it. A cracked, crumbling or loose tile top cannot hold the frame securely.
We look closely at the tile edge during the inspection. Small chips may be fine. A split tile or a loose section needs repair before any damper goes on. That repair appears as a separate line, and the damper is only fitted once the tile top is ready for it.
Damper checks on a maintenance visit
Top dampers have moving parts, and moving parts wear. On a maintenance visit, we open and close the lid a few times and look at the gasket and hinge from the roof. In the firebox, we check the cable, lug and bracket.
Worn parts are easier to replace before they fail with the lid in the wrong position. We tell you what we found and whether anything needs attention now or can wait for the next visit. No part is replaced on a maintenance visit without your approval.
Taking off an existing cap to fit the damper
Many chimneys already carry a cap when a top damper is proposed. The cap usually has to come off so the damper frame can be set on the tile. Whether it goes back on depends on the damper type you choose.
If the damper includes its own hood, the old cap may not be needed any more. If the damper sits beneath a cap, the old one returns if there is room for the lid to open under it. We explain what happens to your cap before the work starts, and a cap that has to be replaced is priced separately.
What your top damper estimate covers in Flagami
- Crown condition around the flue
- Cable route down the flue
- Set time before the next fire
- Firebox protected during drilling
Questions to settle before a top damper
When is it safe to close the damper after a fire?
Only once the fire is fully out and the embers are cold. Closing it earlier can push smoke into the room. The maker's instructions say the same, and we go through them with you at handover.
What will the written record show after installation?
The damper model and material, any adapter used, how it was fixed to the flue, where the bracket sits and what happened to the old throat damper. It also lists anything we saw but did not repair.
Does your warranty cover a top damper you install?
Our workmanship warranty covers the installation we carry out, and we go through its coverage with you before the work is agreed. The damper itself carries its maker's terms, which we pass on with the written record of the job.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
