
Top sealing dampers chosen and fitted in Pembroke Pines
A top damper can close an idle flue against rain and animals, as long as it suits the fireplace.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney top damper makes sense in Pembroke Pines
- Outside noise carrying down the flue
- Lid that will not open fully
- Rust flakes dropping from the throat
- Unclear open and closed positions
Jump to
From flue check to working damper in Pembroke Pines
Only the fireplace flue gets the damper
A chimney may carry flues for other appliances, such as a water heater or furnace. Those flues must stay open to vent their appliance, and a sealing damper does not belong on them.
Before any damper is ordered, we identify which flue serves the fireplace. On a chimney with several flues, only that one gets the damper. The others keep the termination their own appliances call for. The estimate names the flue we are working on, so there is no confusion on the roof.
The adhesive that holds the frame
Many top dampers are held to the flue tile by a bead of high-temperature adhesive, pressed firmly and filled at any gaps. One maker's instructions insist on using only the adhesive supplied with the damper.
We follow the adhesive instructions that come with the product you choose. The tile top is cleaned first so the bead bonds to sound material rather than soot or old sealant. The estimate names the product and its fixing method, and the record notes what was used.
Cleaning the flue before the damper goes on
The damper frame bonds to the tile top, and the flue beneath it is about to be closed off at the top. It makes sense to clean the flue first. One damper maker recommends having the chimney cleaned when the damper is installed, to help make sure the flue is in good working condition.
Cleaning is priced on its own, apart from the damper, and you can take it or leave it. We tell you what we saw in the flue and whether cleaning is needed before bonding the frame. We will not seal a dirty tile top and hope it holds.
Smoke or an alarm after the damper is closed
Smoke drifting into the room after the damper has been closed usually means the fire was not fully out. Open the damper again, keep hands out of the firebox and let the room clear before anyone settles back in.
If a carbon monoxide alarm goes off, the first job is getting every person outside. From the yard, call 911 and wait until responders say the house is safe to enter again. Leave the fireplace unused until the cause has been found.
Checked in the firebox and on the flue top
- Flue shape and size measured
- Cable route down the flue
- Check for animals or nesting first
- Written record of the damper work
Top damper questions, answered for Pembroke Pines
Can a top damper be fitted to any fireplace?
No. Makers restrict where their dampers can go, and several products are marked not for use with gas-burning appliances. The flue shape, the tile top and what else vents through the chimney also matter, so we check all of it first.
What does the free inspection look at for a damper?
The fireplace and its current damper, the smoke shelf, the flue and its tile top, the crown and any cap. We also ask how you use the fireplace. You then receive a free written estimate with the options.
Should I repair the throat damper instead of adding one on top?
Sometimes that is the simpler route. A throat damper that only needs freeing or a new handle may be worth repairing. One that is warped, rusted through or missing parts may point to a top damper instead, and we price both.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
