Top sealing damper installation for homes in Upper Eastside
We compare repairing your throat damper with adding one on top, and you choose the route.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Reasons to ask about a top damper in Upper Eastside
- Top damper cable slack or snapped
- Lid that no longer closes tight
- Worn or torn gasket at the top
- Stiff pull on the damper chain
Jump to
How we fit a top sealing damper in Upper Eastside
When the handle is hard to pull
The pull needed to close a spring-loaded lid can be firm. For some people, especially anyone with limited grip strength, the standard handle is awkward. Makers offer easier-grip handles for customers who find the damper hard to open or close.
Tell us if the pull may be a problem for anyone in the house. We can fit an easier handle or suggest a model with a lighter action. The goal is a damper that gets opened before every fire, which only happens if the handle is comfortable to use.
Outside air coming down an idle flue
An open flue lets air move between the room and the outdoors. With the fireplace unused, that can mean conditioned air leaving the house or outside air drifting in. A closed top damper with a sound gasket reduces that exchange.
One maker's instructions note that closing the damper when the fireplace is not in use keeps heated or air-conditioned air from escaping. We do not put a figure on it, because the effect depends on the house. What we can confirm is that the damper closes and seals properly.
Leave the flue top to us
A top damper is installed and serviced from the roof, and the flue top is often the hardest place on a house to reach. One damper maker's instructions recommend professional installation for that reason.
Please do not climb up to look at the damper, free a stuck lid or adjust the cable from above. Describe what the handle does from inside the room, and we take it from there. We bring the ladders and the safety gear, and we look at the roof around the chimney while we are up.
Checks once the damper is fitted
Before we leave, the damper is opened and closed several times from the handle. We watch the lid from the roof for a full opening and an even close. The bracket is tested for movement, and the cable is checked for rubbing along its route.
We also confirm that the old throat damper cannot swing into the smoke path. Anything that still concerns us goes into the written record. You should find the damper working as described the first time you use it.
Looked at during a free damper inspection
- Crown condition around the flue
- Adapter for a round or lined flue
- Flue top covered if work pauses overnight
- Maker's instructions left with you
Questions to settle before a top damper
Can a top damper be fitted to any fireplace?
No. Makers restrict where their dampers can go, and several products are marked not for use with gas-burning appliances. The flue shape, the tile top and what else vents through the chimney also matter, so we check all of it first.
Does a top damper replace my old throat damper?
It takes over the job of closing the flue. The old throat damper is then fixed open, removed or left in place, depending on its condition and the fireplace. We explain which applies and list it on the estimate.
Where does the handle go inside the fireplace?
A bracket is anchored into the firebox wall on the side you find easier to reach, and the cable passes through it to the handle. We drill with a masonry bit and set the anchors carefully to avoid cracking the firebrick.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo