Ventless gas fireplace repair for homes in Pembroke Pines
Vent-free work you approve inside 72 hours of your free inspection is priced with a 10% discount.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the ODS pilot or burner needs attention
- Control knob stiff or stuck
- Flame changed after cleaning
- Uneven or delayed burner lighting
- Pilot hard to light after gas work
Jump to
Vent-free fireplace service, from pilot to room
When a vent-free pilot flame lifts away
A pilot flame that lifts off its tip or dances away from the sensor often points to gas pressure. Pressure that is too high or too low can both change the flame's shape. Drafts across the burner can do the same.
We take pressure readings at the valve's test points where the model provides them, then compare them with the rating plate. If the supply is outside its range, the fix may belong to your gas utility or a gas contractor. We tell you which side of the valve the problem sits on.
Broken or cracked vent-free logs
The manuals say not to run a vent-free unit with logs broken or out of position. A crack changes how flame meets the log, and a missing piece opens a path the burner was not tested with. Either can raise soot and upset the pilot.
We replace damaged logs with the maker's pieces for that set. A log from another brand, or a piece of decorative stone added for looks, is not a substitute. Old pieces are packed up and hauled away with the other debris.
Flame burning back inside a vent-free burner
Flame that burns inside the burner tube or near the orifice, sometimes with a popping sound, is called backfire in the manuals. Low pressure, poor gas quality, a damaged burner or a blocked air opening can all lead to it. It is not something to live with.
Turn the unit off and leave it off if you see or hear it. We check the pressure, the orifice, the air opening and the burner itself. Then we light it several times to confirm the flame stays where it belongs.
Replacing a whole vent-free burner system
Sometimes the practical answer is a new burner system rather than another part. Discontinued pilots, a damaged valve without a listed replacement or a burner warped by heat can lead there. We explain why before suggesting it.
A replacement system must be listed for the host fireplace and sized for the room, the same as the original. The estimate names the model, what it includes and what happens to the old set. You approve it as its own item, separate from any service work.
What a ventless fireplace estimate lists
- Thermocouple or thermopile output check
- Thermostat and wall control check
- Screen and liner panels inspected
- Bedroom or bathroom location review
Ventless unit questions we hear often
What makes a vent-free fireplace shut itself off during use?
Often the oxygen depletion sensor pilot is reacting to the room air, to lint at its intakes or to low gas pressure. A worn sensing element can do it too. We check those in order before replacing anything, and we explain which one we found.
Should a working vent-free fireplace still get routine cleaning?
Yes. The manuals call for routine cleaning and inspection by a service person, including the burner ports, the air opening and the ODS pilot. Rooms with pets, carpet or heavy use may need it more often, and we suggest a pattern for yours.
Can my ventless unit be converted from propane to natural gas?
Some vent-free models state that field conversion is not permitted, and the unit must burn the gas on its rating plate. Where the maker offers a correct replacement for the other fuel, we explain it. We do not alter orifices on our own.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo