Chase cover repair or a new cover in Broadview Park
Homes in Broadview Park with framed chimneys get a cover measured on the roof, not guessed from the yard.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover trouble visible from the yard
- Water pooling on top of the cover
- Metal banging on the chase in wind
- Cover smaller than the chase top
- Siding stains that grow after rain
Jump to
Chimney chase cover work in Broadview Park
Covers with a screened, lidded section
Some cover makers offer a design with a screened section and a removable lid built around the pipe opening. It can help keep birds and debris off the top of the pipe. One chimney maker's instructions also allow extra screening on field-made chase covers.
Anything that works as a shroud still has to follow the listing rules for the chimney. We check what the chimney maker allows before proposing a screened design. If it suits your chimney, the estimate describes it. If it does not, we explain why a plain cover and the listed cap are the better route.
Stainless covers and the grade question
Stainless steel covers resist corrosion better than bare steel, and cover makers commonly build them with welded seams. Stainless is not one material, though. Grades vary, and the screws, collar and storm collar may not match the sheet.
Ask which grade the cover uses and what the fasteners are made of. We put both on the estimate. The aim is a cover whose parts weather at a similar pace, so a sound sheet is not let down by a corroding screw or collar. That is part of why we name every part, not only the sheet.
The order a chase cover job follows
A chase cover job follows a simple order. We confirm the chimney system, measure the chase and check what we can see. Once the old cover is off, any framing or sheathing repair you approved is done. Then the new cover goes on, followed by the storm collar, sealant and cap.
That order keeps the new cover from being fastened onto damaged wood or fitted around a pipe that needs attention. If your job has several stages, the estimate shows them in sequence. We explain any waiting time between stages before you approve.
Why stock covers rarely fit a chase
Stock chase covers come in a limited set of sizes, while chases are framed to suit each house. A stock cover that is slightly too large leaves a loose skirt, and one slightly too small does not lap the walls. Either way, water finds the gap.
That is why we usually recommend a made-to-measure cover. It costs more to make than a stock size, but it fits the chase you have. If a stock cover happens to suit your chase, we say so. The estimate states which kind we are proposing and why.
Your chase cover quote in Broadview Park, itemized
- Cross-breaks or slope to shed water
- Top of the framing checked once exposed
- Written record of the cover work
- Water path from the old cover traced
Common questions about chimney chase covers
Will a new chase cover fix rotted wood in the chase?
No. The cover stops new water from entering, but rotted sheathing or framing needs its own repair. We note that damage separately, often once the old cover is off, and you decide on it before the chase is closed.
Can the existing cap stay on the chimney pipe?
It can, if it is sound and is the cap listed for that chimney. We check it while we are up there. A damaged cap, or one that does not belong to the system, is noted as a separate item for you to decide on.
Can one cover handle two pipes coming through the chase?
Yes. Covers can be made with two or more holes, each with its own collar. Each pipe keeps the termination its own instructions call for, so we identify what each pipe serves before the cover is ordered.
More Ways to Care for Your Fireplace
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo