Skip to content
(645) 465-4171

Chimney chase cover replacement for homes in Durrs

We measure the chase top on the roof and fit a cover shaped to move water off it.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Chase cover faults worth a call in Durrs

  • Water pooling on top of the cover
  • Storm collar slipped or missing
  • Paint peeling off the metal top
  • Cover smaller than the chase top
Jump to

Chase cover replacement explained for Durrs

Sealant that stays flexible at the collar

The joints around the pipe can move as the metal heats and cools. The chimney instructions we work from call for a non-hardening waterproof sealant at those joints. A hard sealant, or a heavy smear of roofing cement, can crack and let water through.

We look at the old sealant around the collar and the storm collar during the inspection. Cracked, hardened or missing sealant is a common source of leaks even on covers that look sound. On a new cover, we use the type the chimney instructions call for and note it in the record of the work.

How the inspection discount applies to a chase cover

The offer ties to your own inspection date. Any service you give the go-ahead for inside 72 hours of your free inspection is 10% off. That can be the cover alone or the cover with other items from the same estimate.

There is no clock running on the page and no one waiting at the door for an answer. Take the time you need. If you decide after the window, the estimate holds at its written figure, and the work is carried out the same way.

Sealant that gives out before the metal

The sealant around the collar and storm collar can fail well before the cover itself. Sun, heat from the pipe and constant movement can dry it out, and hairline cracks open along the joint. Water then runs down the pipe into the chase.

On a cover that is otherwise sound, renewing the sealant with the type the chimney instructions call for can stop a leak. We check it on every chase visit. If the sealant has failed because the collar itself is corroded or bent, we explain why resealing alone will not last.

Folded corners and where they leak

The corners of a chase cover are where the skirt folds meet. On a folded or poorly joined corner, a small gap can let water run inside the skirt and down the corner of the chase. Corners are also where corrosion often starts on older covers.

We look closely at the corners of the old cover and at the siding below them. On the new cover, the estimate says how the corners are formed and sealed. That small detail decides whether water runs off the corner or into it.

Measured before a chase cover is ordered

  • Drip edge along the skirt
  • Cover metal and gauge named
  • Air spaces at the pipe kept open
  • Temporary cover over the open chase

What people ask about chase covers

Will a new chase cover fix rotted wood in the chase?

No. The cover stops new water from entering, but rotted sheathing or framing needs its own repair. We note that damage separately, often once the old cover is off, and you decide on it before the chase is closed.

Do you make chase covers to measure?

Yes. Chases vary in size and pipe position, so most covers are made to the measurements we take on the roof. That can mean one visit to measure and another to fit, and we explain the sequence at the start.

Does the storm collar get replaced with the cover?

Often, yes. The storm collar seals the gap between the pipe and the new cover's collar. If the old one is corroded, bent or loose on the pipe, it is replaced as part of the job and listed on the estimate.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With