Chase cover repair or a new cover in Harbour Inlet
A cover with cross-breaks, a drip edge and a proper collar keeps rain out of the framed chase.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a chase cover in Harbour Inlet is failing
- Water pooling on top of the cover
- Holes rusted through the cover
- Storm collar slipped or missing
- Soft siding just below the top
Jump to
Chimney chase cover work in Harbour Inlet
Cover replacement and chase repair are separate jobs
A chase cover is sheet metal. The box beneath it is wood framing, sheathing and an outside finish. A long leak past a failed cover can rot that wood. Fixing the wood is a different job with its own skills and materials.
We keep the two apart on the estimate. The cover replacement is priced on its own, and any framing, sheathing or siding repair appears as chase repair, with a description of what we found. You can then see whether you are paying for a new lid, a repaired box or both.
The storm collar above the cover
A storm collar is a band clamped around the chimney pipe just above the cover's raised collar. It works like an umbrella over the joint. Rain running down the pipe is thrown clear before it reaches the gap between the pipe and the cover.
Chimney makers describe sealing the storm collar to the pipe and setting it with an air space above the chase top flashing. If the old storm collar is loose, corroded or missing, it is replaced as part of the job. The estimate lists it, so you can see that the joint around the pipe is covered.
Checks once the new cover is on
Once the cover is fitted, we check that it sits flat on the chase, that the skirt laps the walls evenly and that the fasteners are tight. We look at the collar, the storm collar and the sealant, and confirm the air spaces the chimney calls for are open.
We also check the cap height and make sure water will run off the cover and past the drip edge. Anything that still concerns us is noted in the written record. You should not discover a problem with the new cover at the next heavy rain.
Unlike metals on a chase top near the coast
Where unlike metals touch, salt-laden moisture speeds up the corrosion between them. A stainless cover held with plain steel screws, or copper touching a galvanized storm collar, can leave one part failing long before the rest. A small part fares worst when it is the metal that corrodes, such as a plain steel screw.
Near the coast, we look closely at every metal that meets at the chase top: the cover, the screws, the collar, the storm collar and the cap. We match them where we can and explain how the parts are kept apart where we cannot. The written record lists each metal used.
Parts of the chase job priced separately
- Drip edge along the skirt
- Temporary cover over the open chase
- Old metal and sealant hauled away
- Written record of the cover work
Answers about chase covers in Harbour Inlet
Can the existing cap stay on the chimney pipe?
It can, if it is sound and is the cap listed for that chimney. We check it while we are up there. A damaged cap, or one that does not belong to the system, is noted as a separate item for you to decide on.
What happens if the wood under the old cover is soft?
We stop and show you. Soft sheathing or framing at the top of the chase is chase repair, a separate job with its own price. The open top is covered in the meantime, and nothing is added without your approval.
Who handles a leak that comes through the chase siding?
If water enters through the siding or stucco rather than the top, that is chase repair rather than cover replacement. We trace the water path and tell you which part lets it in, so the estimate addresses the actual entry point.
More Ways to Care for Your Fireplace
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo