Chimney chase cover replacement for homes in Weston
We follow the chimney maker's rules at the pipe, so the air spaces and storm collar stay right.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chase cover faults we repair in Weston
- Rust streaks down the chase siding
- Gap around the pipe collar
- Soft siding just below the top
- Metal banging on the chase in wind
Jump to
The chase cover job, from measure to seal
Streaks running down the chase walls
Orange or brown streaks running down the siding from the top of the chase usually come from corroding metal above. The cover skirt, the fasteners or the storm collar can all be the source. On masonry chimneys, similar streaks tend to start at a flue cap instead.
We trace the streak to the metal it came from. A new cover in a suitable metal should stop new staining if the cover was the source. Cleaning the stains already on the siding is a separate question, and we tell you honestly whether it is worth trying or better left.
The open chase is covered at day's end
Between removing the old cover and fitting the new one, the top of the chase is open. Rain and debris can drop straight in. We do not leave it that way overnight.
At the end of each work day, the open top is covered so the chase stays dry until work resumes. If there is a wait for a made-to-measure cover or for framing repair, we explain how the top will be protected in between. That protection is part of how we work, and it is described in the scope of the job.
How the new cover looks from the street
A chase top is visible from the street, and a new cover changes how it looks. Stainless stays bright for a while, galvanized dulls to grey, and copper darkens. Painted covers can be matched to trim or roof colors.
Tell us if the look matters to you. We discuss finishes and edge profiles that suit the chase while keeping the shape that sheds water and the details the chimney instructions call for. Function comes first, but there is usually room to choose a finish you are happy with.
Chases against a wall and chases through the roof
Some chases stand against an outside wall and run up past the eaves. Others rise from the roof itself. The cover work is similar, but the water paths differ. A wall chase can take water at its side joints and at the roof edge, while a roof chase depends heavily on the flashing at its base.
We look at how your chase is built and where it meets the house or roof. That tells us where else water could enter if the cover is one of several problems. The estimate names the cover work and any other entry points we found, each as its own item.
Chase cover details we write down in Weston
- Drip edge along the skirt
- Listed chase top parts for the chimney
- Cap on the pipe checked for reuse
- Flexible sealant at the collar
Common questions about chimney chase covers
Why does water sit on top of my chase cover?
Flat covers, and covers that have sagged, hold water instead of shedding it. Standing water speeds up corrosion and can eventually find a way into the chase. A replacement with cross-breaks or a slope, plus a drip edge, moves the water off.
Does the storm collar get replaced with the cover?
Often, yes. The storm collar seals the gap between the pipe and the new cover's collar. If the old one is corroded, bent or loose on the pipe, it is replaced as part of the job and listed on the estimate.
Can one cover handle two pipes coming through the chase?
Yes. Covers can be made with two or more holes, each with its own collar. Each pipe keeps the termination its own instructions call for, so we identify what each pipe serves before the cover is ordered.
More Ways to Care for Your Fireplace
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo