Stainless chase covers fitted in Wynwood
Our family team explains the chase top in plain terms before you approve a single item.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a chase cover in Wynwood is failing
- Holes rusted through the cover
- Old tar or cement patches on top
- Metal banging on the chase in wind
- Chimney pipe leaning in its collar
Jump to
Chase cover details that decide the result
The pipe cap is a separate part
Above the chase cover, the chimney pipe ends in its own cap. That cap keeps rain and debris out of the pipe itself, while the cover keeps water out of the box around it. The two are often confused because they sit so close together.
When we quote chase cover replacement, the cap is checked but not automatically replaced. If it is sound and is the cap listed for that chimney, it can go back on. If it is damaged or does not belong to the system, we note it as a separate line, so you can see what each part costs.
Where the pipe sits on the top
The pipe may not sit in the center of the chase. Framing, offsets and the fireplace below all push it one way or another. The hole in the new cover has to match where the pipe really is, not where it would look neat.
We measure the pipe position from two sides of the chase. If the pipe has shifted or leans, we note that, because it may point to a support problem inside the chase. The estimate shows the hole position, and any concern about the pipe is described separately for you to decide on.
Paperwork for a factory-built chimney
A framed chase usually hides a factory-built chimney, and the paperwork for it can save time. The installation manual, the fireplace model details or an old invoice can tell us the chimney maker and which parts belong at the top.
Nothing on file is fine too. The chimney label and the parts themselves usually tell us enough. Where papers exist, they help us order the right storm collar or cap and follow the correct instructions for the collar and air spaces.
Arranging chase cover work for a home in Wynwood
Booking a chase cover visit takes a short call. We ask what you have seen, whether the fireplace is used and whether you know the chimney maker, then agree a time to come out.
On the day, we look at the chase from the yard, the roof and inside near the fireplace. For homes in Wynwood, the free inspection and the free written estimate work the same as for any other job we quote. The findings are explained before we leave, and the decisions stay with you.
Checked on the chase top in Wynwood
- Storm collar fit and seal
- Fastener type and spacing on the skirt
- Workmanship warranty on the fitting
- Support under a wide cover
Your chase cover questions, answered
How can I tell whether my chimney has a chase cover?
If the chimney is a boxed structure finished in siding or stucco with a metal pipe at the top, it has a chase and almost certainly a cover. A brick or block chimney with clay flues has a crown instead. We confirm which during the free inspection.
Can the existing cap stay on the chimney pipe?
It can, if it is sound and is the cap listed for that chimney. We check it while we are up there. A damaged cap, or one that does not belong to the system, is noted as a separate item for you to decide on.
Do I need to be home while the chase cover is replaced?
Not for all of it. The work is on the roof, but we may want to look at the fireplace and any ceiling stains inside. Tell us when booking how to reach you and how to access the property.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo