Chimney brick replacement done unit by unit in Lake Estates
Tell us which face is shedding pieces, and we start the assessment there.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Cracked and flaking brick worth a closer look
- Damage worst near the chimney top
- Bright hard joints beside broken faces
- A clear sealer flaking off the brick
- Chipped edges where joints were ground out
Jump to
What careful brick replacement involves
Tooling new joints to match the wall
The joints around a replaced brick are tooled once the mortar is thumbprint hard. Brick industry guidance explains that a joint tooled at that point is pressed dense and tight to the brick edges, and it asks for the original profile to be matched.
Tooled too soon, the joint smears and dries lighter. Tooled too late, it stays loose at the surface and dries darker. We time the tooling so the new joints blend with the old in shape and shade, which is what makes a replaced unit hard to spot.
Why finding matching brick can take time
Brick industry guidance is candid that locating matching brick may take considerable effort. Colors and sizes change over the years, and the brick in your chimney may no longer be made in the same form.
We tell you if the search is likely to take time and what that means for scheduling. Sometimes the best available match is close but not exact. We explain the choice honestly, so you can decide whether the match suits the face involved before the work goes ahead.
Matching mortar color around new units
A well-matched brick can still stand out if the joints around it are the wrong color. Brick industry guidance stresses matching the existing mortar color so the repaired area blends with the masonry around it.
We compare mortar samples with the existing joints, wet and dry, and use the sand and any pigment needed to get close. The new joints may look a little brighter at first. They usually settle as they weather, and we explain what to expect when the work is done.
A closer match where you see it most
Not every face of a chimney is seen the same way. The face seen from the street or the front door deserves the closest match. A face seen only from the side yard or the roof may accept a brick that is close rather than exact.
We ask which faces matter most to you. Where a perfect match is hard to find, using the best units on the visible faces can be a sensible choice. You decide, and the estimate records where each replacement brick goes.
Brick checks for chimneys in Lake Estates
- Surface marks separated from face loss
- Sample of the proposed brick match
- Joints pointed full around new units
- Written record of units replaced
Spalled brick replacement answers
Can you replace only the damaged bricks on my chimney?
Yes, where the masonry around them is sound. We cut out the spalled or cracked units, clean the openings and set matching brick in mortar that suits the wall. If damage is widespread or the chimney is moving, we explain a wider repair instead.
Should I pull off loose pieces of brick myself?
No. Pulling on loose pieces can bring down more than you expect, and working on a roof carries real risk. Keep people clear of the area below and tell us what you have seen.
Will you check the crown while replacing bricks near the top?
Yes. Bricks near the top often suffer because water comes from above. We check the crown, cap and flue seal, and if one of them is failing, we explain it and price it separately.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo