Spalled brick replacement on chimneys in Palmetto Estates
If the damage is too widespread for single bricks, we explain the wider repair it needs.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs of brick damage on chimneys in Palmetto Estates
- Brick fragments on the roof or ground
- Bricks that look loose or pushed out
- White deposits around damaged bricks
- Vines rooted over damaged brick
Jump to
What careful brick replacement involves
Cracks that run through the brick face
A hairline line on the surface of a brick is different from a crack that runs through its face. Brick industry guidance treats cracks extending through the face shell as a reason to replace the unit.
We look at the crack's width, its path and whether the face on either side sits level. A crack through the face can let water into the brick and the wall behind. That unit goes on the replacement list, and we look at what cracked it before choosing the new one.
Matching color and the range of shades
Few brick walls are one flat color. Brick industry guidance suggests that a sample for matching should represent the full range of colors and textures of the brick selected. A single perfect-looking brick may still stand out beside the variation in your chimney.
We look at the range across each face, not just one unit. Replacement bricks are chosen to sit within that range. Where several units are replaced together, mixing shades can look more natural than a block of identical new brick.
Keeping the chimney wall solid around the flue
The residential code describes masonry chimney walls as solid units or hollow units grouted solid. A replaced brick has to leave the wall as solid as it was, with mortar filling the joints and no voids behind the face.
We fill each opening fully and point the joints around it. Hollow spots behind a new unit would weaken the wall and give water a place to collect. When the replacement area is next to the flue, that solid wall also helps keep the passage sound.
Brick near the ground and rising damp
Bricks at the base of an exterior chimney can stay wet from the ground. Brick industry maintenance guidance lists capillary rise, where moisture wicks up from below, among possible causes of masonry distress.
If damaged units sit low on the chimney, we look at the ground around the base. Soil piled against the brick, plantings that hold moisture or water splashing back from a hard surface can keep the lower courses wet. We explain what might reduce that before replacing units.
Inside a chimney brick replacement proposal
- Loose or cracked units identified
- Opening cleaned of dust and fragments
- Debris kept out of the flue
- Curing care for the new joints
Chimney brick questions we hear
Will a sealer stop my chimney bricks from getting worse?
A sealer does not replace a brick that has already lost its face, and brick industry guidance says a repellent is no substitute for replacement. Film-forming products can even trap moisture. We replace damaged units first and discuss repellents later.
How many bricks can be replaced before a bigger repair is needed?
There is no fixed count. It depends on how the damage is spread and whether the masonry around it is sound and not moving. When damaged units cluster in large areas or courses are loose, we explain a partial rebuild instead.
What does the free inspection include for damaged brick in Palmetto Estates?
We look at each face, mark units that have lost their face, cracked through or come loose, and check the joints around them. The crown, cap and flashing above get checked too, since any of them could be feeding water into those bricks.
More Ways to Care for Your Fireplace
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo