Chimney cap installation on homes across Coconut Creek
A cap sized to the flue, fastened the way its maker intends and backed by our workmanship warranty.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Cap faults we fix on chimneys in Coconut Creek
- No cap visible on the flue
- Rain dripping onto the fireplace floor
- One flue capped and another left open
- Mismatched cap on a metal chimney
Jump to
Planning a chimney cap replacement in Coconut Creek
Enough crown for a multi-flue cap
A crown-mounted cap needs a flat, sound area on the crown for its flanges. The maker's guidance keeps the flanges back from the crown edge, so a narrow crown can leave too little room. Cracks, patches and a sloped surface can also make the flanges sit unevenly.
We measure the crown around the flues and check where each flange would land. If the space is tight, we look at other styles or a made-to-measure base. Where the crown needs repair before it can hold a cap, that repair is listed on its own line, with the cap priced separately.
The cap metal belongs on the estimate
Caps are made in galvanized steel, stainless steel and copper, and within those there are different gauges and grades. A line that only says premium cap tells you nothing you can compare. We write the metal, the style and the screen type on the estimate.
That detail helps in two ways. You can compare our proposal fairly with another one, and anyone working on the chimney later knows what is up there. If we recommend a particular metal for your flue, we explain the reason in a sentence rather than leaving it to a brand name or a marketing label.
Fitting a cap on a stucco-finished chimney
If your chimney is finished in stucco, the top may be a stucco-coated crown over block or brick. A cap that fastens to the crown has to reach sound material beneath the finish. Screws driven only into a thin coat of stucco can loosen.
We look at the top surface and find out what lies under it before choosing a mounting method. Where the stucco is cracked or hollow near the flue, that is noted as a separate repair. The cap is then fitted so its fasteners hold in sound material, and the record says what they were fixed into.
Clearing the flue before capping it
Fitting a new cap is a natural moment to check the flue, because the top is open and reachable. If the flue holds soot, debris or old nesting, it makes sense to deal with that before the cap goes on.
Chimney cleaning is a separate service with its own line on the estimate. You can choose to combine it with the cap or leave it for another time. We explain what we saw in the flue so you can decide. What we will not do is fit a cap over a blocked flue without telling you about the blockage.
Parts of the cap job we price separately
- Crown surface under a multi-flue cap
- Roof access and protection of the roof covering
- Workmanship warranty on the installation
- Fastener metal matched to the cap
Questions about chimney caps in Coconut Creek
Will a new cap stop water getting into the fireplace?
A cap keeps rain out of the flue opening. It cannot stop water that enters through a cracked crown, open mortar joints or failed flashing. If water keeps appearing after the cap is fitted, the entry point probably lies elsewhere and needs its own assessment.
Does a chimney I do not use still need a cap?
An idle flue is still open to rain, leaves and animals, so a cap does useful work there. If you have plans for the fireplace later, mention them, because the flue and the appliance decide which cap suits it.
What happens if the flue tile is cracked under the cap?
A cap clamped to a cracked tile may not hold, and the crack can let water into the chimney. We list the damaged tile as its own line on the estimate so you can decide on that repair before the cap goes on.
More Ways to Care for Your Fireplace
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo