Chimney cap replacement for your home in Lauderdale West
Spark screens, rain caps and multi-flue caps, each chosen for the flue it has to serve.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney cap warning signs around Lauderdale West
- Cap fasteners loose or missing
- One flue capped and another left open
- Cap shifted after a strong storm
- Mismatched cap on a metal chimney
Jump to
Chimney cap work for homes in Lauderdale West
How far the flue stands above the crown
The length of tile standing above the crown affects which caps can be used. A bolt-on cap needs enough exposed tile to grip. A slip-in cap needs a sound opening. A flue cut flush with the crown may leave a crown-mounted or band cap as the practical options.
Height also matters on a chimney with several flues. Where one tile stands taller than the rest, a single cap has to clear it with enough room for the smoke. We measure each flue's height above the crown and explain how those heights narrowed the choice of cap for your chimney.
A cracked tile under the clamp
Flue tiles can crack near the top, especially where a cap has been bolted too tightly or where water has worked into the tile. A crack there weakens the cap's grip and lets rain into the chimney around the outside of the flue.
We look at the tile edge and the top of the flue during the inspection and tell you what we find. A small chip may still allow a secure cap. A split tile needs its own repair before anything clamps to it again. That repair appears as a separate line, and you decide on it before the cap is ordered.
What the free inspection covers for a cap
The free inspection for a cap concern is more than a glance at the metal. We look at the cap, its screen and lid, the fasteners, the flue tile or liner top and the crown or brick it mounts to. We also check the flue for debris or nesting and look at the firebox below.
Where something cannot be seen, we say so. Some conditions inside the flue or under old sealant only show once work begins. You receive the findings and a free written estimate, and you decide what happens next. Nothing is fitted on the strength of the inspection alone.
Whistling or humming from the cap
Humming, whistling or buzzing in the wind usually means something on the cap is vibrating. It may be a loose part, a screen pulled away from its frame or a lid knocked out of square. The noise can carry down the flue and sound louder indoors than it is outside.
Note when you hear it and how strong the wind was. We check the fasteners, the screen mounting and the lid alignment. Often a loose part can be secured. If the frame is bent or worn, the quieter fix is a new cap fitted properly, and we explain which case you have before any work begins.
Parts of the cap job we price separately
- Crown surface under a multi-flue cap
- Crown cracks noted as a separate item
- Open flue covered at day's end
- Handover on screen cleaning and lid removal
Chimney cap FAQs for homes in Lauderdale West
Will a new cap stop water getting into the fireplace?
A cap keeps rain out of the flue opening. It cannot stop water that enters through a cracked crown, open mortar joints or failed flashing. If water keeps appearing after the cap is fitted, the entry point probably lies elsewhere and needs its own assessment.
Will you need to drill into my chimney crown?
Only for caps that mount on the crown. Their flanges are fastened into the crown and kept back from its edge so the concrete does not crack. Caps that clamp to a flue tile or band around the brick need no drilling there.
Is a stainless cap a sensible choice over galvanized steel?
Each metal weathers in its own way, and the grade, the fasteners and the metals it touches matter as much as the name. We state the metal and fasteners on the estimate so you can compare proposals on equal terms.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo