Stone chimney repair for a home in Lauderdale West
Natural, veneer or manufactured, each stone assembly has its own repair, explained in plain terms.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the stone on your chimney needs repair
- Open or crumbling joints between stones
- Damp patches that linger on the stone
- Stone buried in the roofing at the base
- A dark band that stays wet after rain
Jump to
Resetting and repointing chimney stone
Solid stone, anchored veneer or adhered veneer
Stone on a chimney can be built in more than one way. Solid stone masonry carries its own weight. Anchored veneer is a stone face tied back to a wall behind it with metal ties. Adhered veneer, natural or manufactured, is set in mortar over a prepared backing.
The repair follows the construction. A loose stone in solid masonry is a question of joints and bedding. A loose piece of adhered veneer raises questions about the scratch coat, lath and barrier behind it. We identify which you have before we quote, and we explain how we reached that view.
Working out what the stone is set on
The clues sit in plain view once you know where to look. Joint layout, the thickness visible at edges and corners, the base where stone meets roof or ground, and any piece that has come loose all help. Sound and weight tell us more.
If the answer affects the price and is still unclear, we suggest lifting one loose stone at an agreed spot. The back of that stone and the surface behind it usually settle the question. You decide whether we go ahead, and we explain what we saw afterward.
Brackets and fixings set into stone
Antenna mounts, lights and cable clips are sometimes fixed into stone or its joints. Each fixing makes a hole, and each hole is a small path for water into the backing. Fixings driven into stone can also crack it, especially near an edge.
We note every fixing during the inspection. Unused ones can be removed and the holes filled with matched mortar. Fixings that must stay are sealed properly. If any equipment belongs to a service provider, let us know before we touch it, so it can be moved or reset correctly.
Clearances inside a stone-clad chase
A stone-clad chase encloses a factory-built chimney that needs the air space its maker requires. The chase detail in the manufactured stone guide notes that clearances to combustible materials follow the chimney maker's recommendations. That space is part of how the chimney is designed to stay safe, so it is not ours to change.
Stone repair works on the outside of the chase and leaves that space alone. If an opening reaches inside, we keep debris and materials away from the chimney pipe. Any concern with the chimney itself is explained separately and never folded quietly into the stone work.
What the stone inspection and estimate include
- Corroded ties noted and addressed
- Open areas covered at the close of each work day
- Sealant joints at changes of material
- Final review of joints, edges and blend
Stone chimney repair questions
How long does a stone chimney repair take?
It depends on how many stones need resetting, whether backing work is involved and the weather, because mortar needs curing time. We give you the planned sequence together with the estimate.
What mortar do you use for repointing stone?
One chosen for the stone and the assembly. For natural stone, the mortar should not be harder than the stone. Manufactured stone follows its maker's guidance. We explain the choice rather than using one mix everywhere.
What should I mention when I call about stone damage?
Say which stones moved or fell, where they are, whether the area gets wet after rain and any past repairs. If you know the stone product or who installed it, mention that too.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo