Chimney cap installation on homes across Medley
The estimate names the cap, the metal and the fastening, with any repair beneath it priced separately.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney cap in Medley should be replaced
- Rattling from the chimney top in wind
- Leaves or twigs landing in the firebox
- Old cap glued or siliconed in place
- Cracked flue tile under the cap
Jump to
What goes into a new chimney cap in Medley
Open area under the lid and the draw
A rain cap sits over the flue with open sides beneath its lid. The Florida Building Code sets a minimum for that open area, in proportion to the flue outlet the cap serves. A cap that is too small or sits too low can narrow the path the smoke has to take.
We size the cap against the flue it covers, not against the width of the chimney. Where one cap covers several flues, each flue still needs its own clear path out. If your fireplace smoked after an earlier cap was fitted, mention it when you call. That history tells us where to start looking.
A written record of the cap work
After the job, you receive a written record of the work. It names the cap, the metal, the screen and the fastening method, along with any repairs done at the same time. It also notes what we saw but did not repair, such as a crown crack you chose to handle later.
Keep that record with your house papers. It helps anyone who works on the chimney after us, and it helps you if the house is sold. If you had a free inspection without going ahead, you still keep the free written estimate and the findings it lists for your home in Medley.
Fitting a cap on a stucco-finished chimney
If your chimney is finished in stucco, the top may be a stucco-coated crown over block or brick. A cap that fastens to the crown has to reach sound material beneath the finish. Screws driven only into a thin coat of stucco can loosen.
We look at the top surface and find out what lies under it before choosing a mounting method. Where the stucco is cracked or hollow near the flue, that is noted as a separate repair. The cap is then fitted so its fasteners hold in sound material, and the record says what they were fixed into.
Arranging access when you are not home
Cap work mostly happens outside, so you may not need to be home for it. We still need to know how to reach the roof safely and whether we can look at the fireplace inside. Gates, pets and alarm systems all need a plan.
Tell us when booking whether someone will be at the house and how to reach you during the visit. If we need to see the fireplace and nobody is home, we arrange that part for another time. The findings and the estimate are sent to you, and nothing is done without your approval.
Included in your chimney cap visit in Medley
- Flue count and position on the top
- Fastener type and fastening points
- Check for debris or nesting in the flue
- Draw check once the cap is on
What to ask about a chimney cap in Medley
How does the inspection discount apply to cap replacement?
Your own free inspection starts the window. For the next 72 hours, the cap and any other item on that estimate can be approved at 10% off, and later approvals keep the written price.
Can a chimney cap keep birds and animals out of the flue?
A cap with an intact screen blocks the opening animals use. It must not be fitted over an animal that is already inside. If you hear movement in the flue, tell us, so removal is handled before the top is closed.
Will you need to drill into my chimney crown?
Only for caps that mount on the crown. Their flanges are fastened into the crown and kept back from its edge so the concrete does not crack. Caps that clamp to a flue tile or band around the brick need no drilling there.
More Ways to Care for Your Fireplace
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo