Worn chimney cap replacement in Miami Gardens
We refasten a sound cap where that is enough, and replace it only when the cap itself has failed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a chimney cap in Miami Gardens needs work
- Rain dripping onto the fireplace floor
- Scratching or chirping heard in the flue
- Cap lid lifted, dented or loose
- Metal flakes on the hearth or damper
Jump to
Choosing and fitting chimney caps in Miami Gardens
Measure the tile, not the hole
For a cap that clamps onto a flue tile, the outside size of the tile matters more than the opening inside it. Tile walls vary in thickness, and a cap sized to the inside of the flue can end up too small to slide over. Rectangular tiles also need both sides measured.
We take those measurements on the roof during the free inspection. Where the tile is chipped, out of square or wrapped in old mortar, we note it, because that changes the fit. The estimate lists the sizes we measured, so the cap that arrives is the cap that fits your flue.
When the cap has gone missing
Sometimes a cap is simply gone, found in the yard, on the roof or nowhere at all. Before replacing it, we check why it came off, because the tile, the fasteners or the crown may be the real fault.
An open flue also collects whatever falls into it. We look down the flue for leaves, nesting material and debris, and check the firebox and damper below. If the flue needs clearing, that is a separate item. Keep any pieces of the old cap you find, as they can tell us how it was fastened and what failed.
Why spark screens matter near roofs
A spark arrestor screen catches embers that rise from a wood fire before they land on the roof or nearby plants. NFPA 211 and the Florida Building Code both deal with spark arrestors, and the code sets requirements for the mesh wherever one is installed on a masonry chimney.
If you burn wood, the screen is working whenever a fire is lit. We check that it is intact, correctly sized and free of large holes. A torn screen is a reason to act even if the rest of the cap looks fine, and we say so in the findings.
Masonry hoods and other older cap types
Not every chimney top ends in a metal cap. Some older designs use a slab of stone or concrete set on piers above the flue, or a clay pot on the tile. These act as rain covers too, and they can crack, shift or lose their mortar over time.
If your chimney has one of these tops, tell us. We look at its condition and whether it still leaves enough open area for the smoke. Repairing it, replacing it with a metal cap or leaving it alone are all possible routes, and we explain the tradeoffs before you choose.
Parts of the cap job we price separately
- Cap metal named on the estimate
- Top course of brick under a band cap
- Roof access and protection of the roof covering
- Handover on screen cleaning and lid removal
Your chimney cap questions, answered in Miami Gardens
Will a new cap stop water getting into the fireplace?
A cap keeps rain out of the flue opening. It cannot stop water that enters through a cracked crown, open mortar joints or failed flashing. If water keeps appearing after the cap is fitted, the entry point probably lies elsewhere and needs its own assessment.
Why does smoke come into the room after a cap was fitted?
A clogged screen, a lid set too low or a cap that is too small for the flue can hold smoke back. Stop using the fireplace and ask us to look at the cap and the flue before the next fire.
What will I receive once the cap is fitted?
A written record of the work: the cap installed, its metal, how it was fastened and anything we noted but did not repair. Keep it with your house papers, because the next person on the roof will find it useful.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo