Chimney cap replacement for your home in North Lauderdale
We fit caps to clay tile, metal liners and factory-built pipe, each by the method it calls for.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney cap warning signs around North Lauderdale
- Mesh screen torn, bent or missing
- Smoke spilling into the room after cap work
- Cap fasteners loose or missing
- Metal flakes on the hearth or damper
Jump to
Choosing and fitting chimney caps in North Lauderdale
Clues you can read from the yard
A lot can be seen without a ladder. Stand back from the house, use binoculars if you have them, and look at the top of the chimney. A missing cap, a lid sitting crooked, a torn screen or dark streaks below the cap are all visible from the yard.
Indoors, look at the firebox floor and the damper for leaves, twigs, rust flakes or damp patches. Note what you see and when you first saw it. Those notes help us plan the visit to your home in North Lauderdale, and they tell us whether to bring a cap, a screen or measuring gear only.
Clearing the roof and hauling the old cap away
Cap work leaves behind the old cap, bolts, broken mortar or sealant, and sometimes debris pulled from the flue. We gather it up, clear the roof area around the chimney and haul it away rather than leaving it in your bin or yard.
We also check the firebox and hearth below, because some debris can fall down the flue during removal. If anything reached the room, we clean it up. Tell us before the visit if there is furniture, a rug or anything fragile near the fireplace, so we can protect it before starting.
Fitting a cap on a stucco-finished chimney
If your chimney is finished in stucco, the top may be a stucco-coated crown over block or brick. A cap that fastens to the crown has to reach sound material beneath the finish. Screws driven only into a thin coat of stucco can loosen.
We look at the top surface and find out what lies under it before choosing a mounting method. Where the stucco is cracked or hollow near the flue, that is noted as a separate repair. The cap is then fitted so its fasteners hold in sound material, and the record says what they were fixed into.
Loose brick at the top of the chimney
The top course of brick takes the full force of the weather and often holds a cap. When its mortar joints open or the brick itself spalls, the course can loosen. A cap clamped around it or fastened near it then has little to hold.
We check the top course during the inspection by looking at the joints and the brick faces. Loose or damaged brick is noted as a masonry repair, separate from the cap. Fitting a new cap onto a loose course would only move the problem. The estimate shows the repair and the cap as two decisions.
Line items on a chimney cap estimate
- Removal of the old cap and hardware
- Draw check once the cap is on
- Top course of brick under a band cap
- Handover on screen cleaning and lid removal
Asked about chimney cap replacement in North Lauderdale
Can a cap be fitted over a damper at the chimney top?
Some top-mounted dampers already act as a cap, and some are made to sit beneath one. The damper maker's instructions decide which. Tell us if your chimney has a cable-worked damper at the top so we check it before recommending a cap.
Does a new cap change how my fireplace draws?
A cap sized and set correctly should not hold the smoke back. The code sets a minimum open area under a rain cap relative to the flue it serves, and a low lid or a clogged screen can restrict the smoke, so we check both.
What should I mention when I call about a cap?
Describe what you see from the ground, how the fireplace is used and whether anything else vents through the chimney. Mention recent roof work or strong storms. Those details help us plan the visit to your home in North Lauderdale.
More Ways to Care for Your Fireplace
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo