Chimney cap installation on homes across Pembroke Park
Our family team fits the cap, clears the roof area and hauls the old parts away.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney cap warning signs around Pembroke Park
- Cap lid lifted, dented or loose
- Cracked flue tile under the cap
- Nesting material showing at the top
- Cap shifted after a strong storm
Jump to
Small details that decide a chimney cap fit
Caps that fasten to the crown instead
A cap that covers several flues does not attach to the tiles at all. It stands on the crown, and flanges at its base are fastened into the concrete with masonry screws and adhesive. The maker's guidance keeps those flanges back from the crown edge so drilling does not crack it.
That makes the crown part of the cap installation. A crown with open cracks, loose patches or a thin edge may not hold the fasteners well. We look at the crown surface where the flanges would land and tell you whether it can take the cap or needs repair first.
Sweeping through or around a new cap
A chimney that is used needs cleaning from time to time, and the cap should not make that harder. Some caps have a lid that lifts off, some have a hinged screen and some are removed entirely by their fasteners. Each is fine if the method is clear.
We choose a cap that allows cleaning without damaging it, and we show you how it opens. If a sweep ever finds the cap hard to remove, the written record tells them how it was fitted. The Florida Building Code's spark arrestor rules also call for that cleaning access.
Arranging access when you are not home
Cap work mostly happens outside, so you may not need to be home for it. We still need to know how to reach the roof safely and whether we can look at the fireplace inside. Gates, pets and alarm systems all need a plan.
Tell us when booking whether someone will be at the house and how to reach you during the visit. If we need to see the fireplace and nobody is home, we arrange that part for another time. The findings and the estimate are sent to you, and nothing is done without your approval.
Keeping unlike metals apart near the coast
Where two unlike metals touch, salt-laden moisture speeds up the reaction between them. A stainless cap on galvanized fasteners, or copper touching a galvanized chase, can leave one metal corroding much faster than expected. The effect is worst when the metal that corrodes is a small part, such as a fastener, set against a large surface of the other.
Near the coast, we pay particular attention to what the cap will touch. We match fasteners to the cap and look at the flashing and any chase metal nearby. If a mix of metals cannot be avoided, we explain how the parts are kept apart and what to watch for on later visits.
Line items on a chimney cap estimate
- Condition of the tile's top edge
- Cap style suited to the mounting surface
- Label details on a metal chimney
- Old adhesive cleared from the tile
Asked about chimney cap replacement in Pembroke Park
Does a spark screen matter if I rarely burn wood?
The screen also keeps birds and animals out, so it earns its place on a seldom-used chimney. Where a spark arrestor is fitted to a masonry chimney, the Florida Building Code sets how open its mesh must be and requires access for cleaning.
Does a chimney I do not use still need a cap?
An idle flue is still open to rain, leaves and animals, so a cap does useful work there. If you have plans for the fireplace later, mention them, because the flue and the appliance decide which cap suits it.
What happens if the flue tile is cracked under the cap?
A cap clamped to a cracked tile may not hold, and the crack can let water into the chimney. We list the damaged tile as its own line on the estimate so you can decide on that repair before the cap goes on.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo