Chimney cap installation on homes across Three Lakes
A new cap should leave sweeping access open, so we explain how it comes off for later cleaning.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Cap faults we fix on chimneys in Three Lakes
- Smoke spilling into the room after cap work
- Cap fasteners loose or missing
- Cap shifted after a strong storm
- Mismatched cap on a metal chimney
Jump to
Choosing and fitting chimney caps in Three Lakes
What the free inspection covers for a cap
The free inspection for a cap concern is more than a glance at the metal. We look at the cap, its screen and lid, the fasteners, the flue tile or liner top and the crown or brick it mounts to. We also check the flue for debris or nesting and look at the firebox below.
Where something cannot be seen, we say so. Some conditions inside the flue or under old sealant only show once work begins. You receive the findings and a free written estimate, and you decide what happens next. Nothing is fitted on the strength of the inspection alone.
Separate caps on each flue
Where a chimney carries more than one flue, separate caps on each tile are an alternative to one large cap on the crown. Separate caps leave the crown undrilled and let each flue have the termination that suits it.
They also have limits. Flues set close together may not leave room for individual caps, and tiles in poor condition may not hold them. We compare both approaches for your chimney and show the reasoning on the estimate. Neither design wins on every chimney. The layout of the flues and the condition of the top decide it.
Caps that mount on a liner's top plate
Where a chimney has been relined with a stainless liner, the liner usually hangs from a top plate on the crown. The liner maker supplies a cap that fastens to that plate or to the liner itself. One maker's instructions show the cap removed by its screws for cleaning.
If your chimney has a liner, the replacement cap should be the one the liner system calls for, not a generic cap clamped over the plate. We identify the liner and its top plate before recommending anything. The written record then notes the liner system, so a future cap can be matched without guesswork.
When another company recommended a new cap
Sometimes we hear from someone after another company has recommended a new cap. A second opinion is reasonable, especially if the reason given was vague. We look at the cap and the chimney top ourselves rather than simply repeating the earlier advice.
Share the earlier estimate if you are comfortable doing so. We explain where we agree, where we see things differently and why. Our free written estimate stands on its own, so you can compare both and choose. If the cap does not need replacing, we tell you that plainly.
What a chimney cap proposal should name
- Outside size of each flue tile
- Crown cracks noted as a separate item
- Tile repair priced apart from the cap
- Open flue covered at day's end
Common chimney cap questions, answered
Will you need to drill into my chimney crown?
Only for caps that mount on the crown. Their flanges are fastened into the crown and kept back from its edge so the concrete does not crack. Caps that clamp to a flue tile or band around the brick need no drilling there.
What will I receive once the cap is fitted?
A written record of the work: the cap installed, its metal, how it was fastened and anything we noted but did not repair. Keep it with your house papers, because the next person on the roof will find it useful.
Should the crown be fixed before the cap is replaced?
If the crown is cracked where a multi-flue cap would fasten, yes, or the cap ends up mounted on a weak surface. We describe the crown during the free inspection and price that repair as a separate item.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo