Chimney crown replacement and repair across Coral Shores
We look at the crown, the flue joints and the brick below before suggesting sealing or a new crown.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the chimney crown lets water in
- A crack running outward from a flue
- Dark streaks on the brick below the top
- Loose cap fixings set into the concrete
- Sections of crown that look lifted
Jump to
How a crown repair runs, step by step
Why paint is not a crown coating
Paint on a crown can look like a quick seal. A crown coating is made to stay flexible and bridge fine cracks as the concrete moves. Brick industry guidance on coatings notes that a surface film can crack along with an active crack beneath it.
If your crown has been painted, we check how well the paint is holding and what lies underneath. Loose paint comes off before any proper treatment. We explain the difference between a membrane made for crowns and a finish that only changes the color.
Crowns on homes with more than one chimney
A house may have more than one chimney, and their crowns may not fail at the same pace. One may face more weather or have been repaired more recently. Each needs its own look.
We inspect each chimney you ask about and list its findings separately. You can approve work on one without committing to the others. If a chimney is no longer used, we still check its crown, because an unused chimney can let water into the house just as easily.
Adding an overhang to an old crown
An old crown that stops flush with the brick cannot grow an overhang by itself. Adding one means forming new concrete around the top or replacing the crown. A coating over a flush crown leaves the water path unchanged.
If the flush edge is the main reason the brick below stays wet, we explain replacement with an overhanging crown and a drip. Where the rest of the crown is sound and the staining is minor, we may suggest leaving it and watching. You weigh the options with the reasons in front of you.
Plain questions to ask about crown work
A good crown proposal should answer a few plain questions. Ask what is wrong with the crown, what causes it and what the repair changes. Ask what happens at the flue joints and whether the cap comes off.
Also ask what the work does not cover. A crown repair does not fix the flashing, the liner or the brick lower down. We answer those questions in writing on your estimate, so you know exactly what you are approving and what remains separate.
The crown repair items you approve
- Overhang and drip edge check
- Earlier patches and coatings identified
- Written record of completed crown work
- Sealant type and backer material at the flue
Crown repair questions from homes in Coral Shores
Is a mortar wash on top of my chimney the same as a crown?
It sits in the same place, but a thin sloped mortar topping is not built like a formed crown. Brick industry guidance warns that thin, feathered edges are more prone to deterioration. We check whether yours can be coated or should be replaced.
Should I ask about the crown if the fireplace is never used?
Yes. The crown keeps rain out of the masonry whether or not you light fires. Water entering an unused chimney can still damage brick, the flue and nearby ceilings. A free inspection tells you whether the top needs attention.
How is debris from the old crown handled?
Broken concrete is lowered from the roof with care, and the work area is cleaned. We haul the debris away. Should the job pause with the chimney top open, we fit a cover over it before leaving and keep it there until work resumes.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo