Crown sealing and crown rebuilds for chimneys in Miami Beach
Our family team explains the crown condition, the proposed method and the care the new work needs.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Crown damage worth mentioning when you call
- Concrete chips in the gutter
- Dried or split caulk around the flue
- Dark streaks on the brick below the top
- Sections of crown that look lifted
Jump to
How we approach crown repair in Miami Beach
Crown cracks that start at a flue tile
A pattern of cracks spreading out from one flue tile is a useful clue. The crown may have been cast tight against the liner, with repeated heating pushing it apart. Water then follows the same lines into the chimney.
Filling those cracks without freeing the liner joint may not stop them returning. We check whether the crown can be cut back and resealed at the liner or whether it has broken up too far. Either way, you see the cause explained, not just the crack.
Cap fasteners drilled into the crown
Many rain caps are fastened into the crown or clamped to a flue tile. Holes drilled into a crown are small openings for water if they are not sealed. Loose or rusted fasteners can also crack the concrete around them.
During a crown visit we check how the cap is attached and whether its fixings have damaged the top. If the crown is replaced, the cap comes off and goes back on afterwards when its condition allows. A cap that needs replacing is priced as a separate item, not folded into crown work.
Keeping the flue sealant joint in good order
The sealant joint at each flue is often the first part of a crown to wear. Brick industry maintenance guidance expects sealants to need replacing well before the masonry around them. A split or hardened bead lets water run between liner and crown.
During maintenance visits we check that joint on every flue. Failed sealant is cut out, the joint is cleaned and primed, and a new bead goes in over backer material. It is a small job that protects the larger work of the crown.
Crowns on chimneys built of concrete block
Some masonry chimneys are built of concrete block rather than brick, sometimes finished with stucco. The crown's job is the same. The code expects hollow units in a chimney wall to be grouted solid, so the top should be solid enough to carry the crown.
We check the top of the wall when the crown is removed. If hollow cells are open under the old crown, water may have been draining straight into them. We explain how the new crown is bedded so it sits on solid material and sheds water outward.
Before you approve crown work in Miami Beach
- Overhang and drip edge check
- Removal of loose or hollow sections
- Reinforcement planned for a new crown
- Aftercare instructions for the new surface
Crown repair questions from homes in Miami Beach
Is a mortar wash on top of my chimney the same as a crown?
It sits in the same place, but a thin sloped mortar topping is not built like a formed crown. Brick industry guidance warns that thin, feathered edges are more prone to deterioration. We check whether yours can be coated or should be replaced.
What does the free inspection include for a chimney crown?
We look at the crown surface, edges, slope, overhang and the seal at every flue, plus the cap fixings and the brick just below. You hear the findings on site and receive a free written estimate that keeps each item separate.
Will crown work damage my roof covering?
The roof is protected where we stand, stage material and apply products. Spills are cleaned as the work proceeds. Tell us about fragile roofing before the visit so the access plan accounts for it.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo