Repairing and replacing chimney crowns in Nurmi Isles
If a coating will not hold on your crown, we say so and explain what replacement involves.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a failing crown shows from the ground
- Water standing on the crown after rain
- A gap beside a flue tile
- Loose cap fixings set into the concrete
- Sections of crown that look lifted
Jump to
Getting the chimney crown right in Nurmi Isles
How crown curing time depends on the weather
Crown coatings and new concrete both need time to cure. The coating data sheet gives curing times that vary with temperature. A surface that feels dry to the touch has not always finished curing.
We leave you with instructions based on the material actually used. They cover when the fireplace can be used again and when the cap or other parts can be touched. If another trade plans to work on the roof soon, tell us so the new surface is not disturbed while it cures.
When the crown is only a leak suspect
A cracked crown is an easy suspect for any chimney leak. It is not always the culprit. Stains inside can also come from the cap, the flashing, the brick face or the roof nearby.
When the source is uncertain, we say so. We explain what the crown inspection confirmed and what it could not. If the job calls for it, we narrow down the entry point with a hose water test. That way the crown repair is chosen because the evidence supports it.
An earlier crown coating that is peeling
A crown coating that lifts at the edges or blisters in the middle has lost its bond. Water may be getting behind it. Once that happens, the membrane can hold moisture against the concrete instead of keeping it out.
We check whether the failed coating can be removed cleanly and whether the concrete beneath is still sound. If it is, a fresh application may be possible after preparation. If the crown has deteriorated under the old membrane, we explain replacement. Either way, the peeling layer comes off before anything new goes on.
Renewing a crown coating later on
A crown coating is a protective layer, and its condition should be checked from time to time. Weather, roof traffic during other work and movement of the crown can wear or damage it. A worn area lets water back into the concrete.
During maintenance visits we look at the coating for thin spots, lifting edges or cracks. Local touch-ups may be possible when the base is still sound. We explain whether renewal makes sense and list it separately, so you can see it as maintenance rather than a new repair.
What your crown estimate lists
- Sealant joint around the flue tiles
- Written record of completed crown work
- Water path notes for leak questions
- Access plan for the roof and chimney top
Crown repair answers for Nurmi Isles
Will a new cap stop water coming through the crown?
No. A cap covers the flue opening, while the crown covers the masonry around it. Water that enters through a broken crown keeps entering under a new cap. We check both parts and price each one on its own line.
Is a mortar wash on top of my chimney the same as a crown?
It sits in the same place, but a thin sloped mortar topping is not built like a formed crown. Brick industry guidance warns that thin, feathered edges are more prone to deterioration. We check whether yours can be coated or should be replaced.
What if my chimney has a metal top instead of concrete?
Some masonry chimneys carry a metal or stone top rather than cast concrete. A framed chimney with a sheet-metal cover has no crown at all. We identify which one you have before suggesting any crown work.
More Ways to Care for Your Fireplace
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo