Chimney crowns assessed and repaired in River Run
Book the crown work while your free inspection is less than 72 hours old, and 10% comes off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the crown at the chimney top needs work
- Concrete chips in the gutter
- Dark streaks on the brick below the top
- Loose cap fixings set into the concrete
- Water marks on a ceiling beside the chimney
Jump to
Crown repair decisions explained plainly
Giving the crown enough slope to drain
A crown must shed water, and slope is how it does that. The code calls for the top of a masonry chimney to be sloped. A flat or dished top holds water, which can then soak into the concrete and reach any crack.
Coating a flat crown does not add slope. We check how water leaves the top today, including any spots where it stands after rain. If the crown cannot drain, we explain replacement with a sloped shape. The exact fall is set on site to suit the chimney and its flues.
The brick courses right under the crown
The top few courses of brick take water from any crown that fails. Their joints may wash out and their faces may flake. Once the old crown comes off, their condition is much easier to see.
We tell you before removal that the top courses will be assessed, and what happens if they are loose. Relaying or repointing that brick is masonry work with its own line on the estimate. We stop and explain before adding it, so the crown price does not grow without your approval.
Removing an old crown without loosening brick
Breaking out a failed crown needs control. The aim is to remove the unsound concrete while leaving the brick below and the flue liners undisturbed. Heavy-handed demolition can loosen the very courses the new crown must sit on.
We remove old crown material in sections and check the brick as it is exposed. If a liner or a course of brick is already loose, we stop and explain before going further. The estimate describes the removal method so you know what to expect on the day.
Renewing a crown coating later on
A crown coating is a protective layer, and its condition should be checked from time to time. Weather, roof traffic during other work and movement of the crown can wear or damage it. A worn area lets water back into the concrete.
During maintenance visits we look at the coating for thin spots, lifting edges or cracks. Local touch-ups may be possible when the base is still sound. We explain whether renewal makes sense and list it separately, so you can see it as maintenance rather than a new repair.
What your crown estimate lists
- Sealant joint around the flue tiles
- Cap removal and reinstallation
- Flue liner projection above the crown
- Upfront price for each crown item
Crown repair questions from homes in River Run
Can you repair the crown on a stone or stucco chimney?
The code allows a concrete, metal or stone top on a masonry chimney, and a stucco or stone face does not change the crown's job. We assess the top the same way and treat repairs to the sides as separate work.
Can a bond break be added to a crown that lacks one?
On an existing crown, the practical step is opening the joint at each flue liner and sealing it properly with backer material and elastomeric sealant. On a new crown, the bond break is built in. We explain which applies after inspection.
Will crown work damage my roof covering?
The roof is protected where we stand, stage material and apply products. Spills are cleaned as the work proceeds. Tell us about fragile roofing before the visit so the access plan accounts for it.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo