
Crown sealing and crown rebuilds for chimneys in Sea Ranch Lakes
A new crown gets slope, an overhang, a drip edge and a sealed joint at every flue.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Crown damage worth mentioning when you call
- A crack running outward from a flue
- Concrete chips in the gutter
- Crumbling edges along the crown overhang
- Moss or growth holding on the crown
Jump to
How we approach crown repair in Sea Ranch Lakes
Coating within the maker's temperature limits
The data sheet for a brushable crown coating sets an upper limit for surface and air temperature at the time of application. A roof in strong sun can run hotter than the air around it. Working outside that range goes against the product instructions.
On hot days we may schedule coating for the cooler part of the day. We would rather move the start time than push a product outside its instructions. If you have a preference for arrival windows, tell us when booking and we will explain what the product allows.
Shrinkage cracks in new crown concrete
Concrete shrinks as it cures. Brick industry guidance treats shrinkage of a cast-in-place crown as a certainty and calls for reinforcement to help control it. Fine cracks on an older crown may date back to that original cure.
We explain the difference between old shrinkage lines and cracks that are active and growing. On a new crown, reinforcement and curing care are part of the plan. If you notice fine lines on a new crown later, tell us so we can look at them against what was expected.
Crown work and a damaged flue liner
The crown surrounds the top of the flue liner, but it does not repair the liner. A cracked tile, a gap between tiles or a liner that has broken at the top are flue problems. They need their own assessment.
When we see liner damage during crown work, we describe it and explain its effect on the crown plan. Sometimes the liner top must be dealt with before the new crown can be sealed to it. That work is priced separately so you can see how the two jobs relate.
Repairing one damaged section of a crown
A crown that is sound except for one broken section can sometimes be repaired locally. Loose material is removed back to firm concrete, and the section is rebuilt with a compatible repair material shaped to match the slope and edge.
A local repair only makes sense when the rest of the crown is in good condition. We explain where the repair begins and ends and how it will meet the existing surface. If a coating over the whole top is also advised, that is listed as its own item.
Crown inspection points for homes in Sea Ranch Lakes
- Earlier patches and coatings identified
- Curing time and weather protection
- Debris removal and haul-away
- Sealant type and backer material at the flue
What people ask about crown sealing
Can you repair the crown on a stone or stucco chimney?
The code allows a concrete, metal or stone top on a masonry chimney, and a stucco or stone face does not change the crown's job. We assess the top the same way and treat repairs to the sides as separate work.
What if my chimney has a metal top instead of concrete?
Some masonry chimneys carry a metal or stone top rather than cast concrete. A framed chimney with a sheet-metal cover has no crown at all. We identify which one you have before suggesting any crown work.
Do you seal the crown and the chimney brick at the same visit?
They are separate products and decisions. A crown coating treats the top surface. A water repellent for brick is considered only after cracks and joints are repaired, and it should let the masonry breathe. Each appears as its own line.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo