Skip to content
(645) 465-4171

Chimney damper replacement for homes in Coral Springs

Tell us what the handle does, and we check the plate, frame and pivots before naming a repair.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run
Call Now (645) 465-4171 Book Online

What a failing throat damper looks like

  • Plate will not open past halfway
  • Rattling above the fireplace on windy days
  • Daylight visible past the closed plate
  • Crank turns without moving the plate
Jump to

Your throat damper, part by part

Setting a new frame in the throat

A replacement frame has to sit firmly in the throat so the plate closes squarely against it. Setting it may mean removing some mortar or brick around the old frame and resetting it afterward. Joints close to the fire are made with a mortar rated for that heat, following the product instructions.

We keep the disturbance as small as the job allows. Any firebrick that must come out is noted on the estimate, along with how it will be reset. If the throat masonry turns out to be weaker than expected, we stop and explain before going further.

A second look at a damper diagnosis

If another company has told you the damper must be replaced, you are welcome to ask for our view. We look at the plate, frame and control, and we tell you whether we agree.

Sometimes a damper that was written off can be freed or re-hung. Sometimes replacement is the right call, and we say so. Either way, our free inspection gives you an independent opinion and a written estimate you can set beside the one you already have. The decision stays with you.

Very hot fires and the damper plate

A cast damper plate sits right above the flames. Very hot fires, such as those fed with scrap lumber or large loads of paper, can warp it. Once warped, it may not seat properly again.

Burn dry, seasoned wood in a fire sized for the fireplace. EPA guidance on wood burning favors dry wood and warns against burning trash or treated wood, which can damage the appliance and release harmful chemicals. Those habits protect the damper, the firebox and the flue together.

When cleaning is not enough

Cleaning a damper removes soot, rust scale and debris, and it often restores movement. It does not straighten a warped plate, rejoin a cracked frame or replace a missing lug.

We tell you honestly when cleaning will solve the problem and when it will only help for a while. If a part is beyond cleaning, we say which part and why. That way you are not paying twice, once for a cleaning and again for the replacement it was never going to avoid.

Lines you will find on the damper estimate

  • Plate travel from open to closed
  • Model and serial number lookup
  • Free written estimate before any work
  • Operation check from inside the room

Before you approve damper work

Will you show me the damper part that failed?

Yes, if you would like to see it. We point out the worn pivot, broken lug or bent rod before replacing it. Old parts are then bagged and hauled away with the rest of the debris.

Is damper repair covered by a warranty?

Our workmanship warranty covers the work we did on the damper. If our repair does not hold as it should, tell us and we come back to look at it. Ask us to explain the terms for your job before you approve.

Could the damper be why my room smells of old smoke?

It can be one reason. A plate that does not close lets air drift down the flue and carry the smell of old deposits with it. We check the seal and the deposits and explain whether the damper is the cause.

More Ways to Care for Your Fireplace

More about chimney damper repair and replacementEvery service in Coral Springs

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With