Throat dampers repaired or replaced in Deerfield Beach
Factory-built or masonry, your fireplace damper is repaired with parts that suit its design.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper symptoms you can check from the room
- Grinding or squealing when the control moves
- Soot stains above the fireplace opening
- Handle missing or snapped off
- Damp debris resting on the smoke shelf
Jump to
Damper repairs and replacements for Deerfield Beach
Poker controls and notched rods
A poker control is a rod or handle that hangs down at the front of the throat and hooks into notches. Pushing it moves the plate, and the notch holds the position. It is a simple design, but the notches and the hook wear with use.
If the rod slips out of its notch or will not hold a setting, tell us how it behaves. We check the rod, the notched bracket and the hook where it meets the plate. A replacement rod can often be fitted to the existing plate, which keeps the job inside the fireplace opening.
A damper handle can be hot during a fire
The damper control is metal, and it sits close to the fire. During use it can become too hot to hold. Most fires do not need the damper adjusted once it is fully open, which is another reason to open it before lighting.
If you must move the control during a fire, use a fireplace glove or a tool, and move it only as far as the manual allows. Do not close the damper to slow a fire down. A handle that is hard to reach or hard to grip is something we can look at during the visit.
Flakes of rust below the damper
Small flakes of rust on the firebox floor usually come from the damper above. They show that the plate or frame is shedding scale, often where moisture has reached it.
A few flakes are common and do not mean the damper is failing. A steady fall of scale, or pieces large enough to notice, suggests the metal is thinning. Mention what you see when you call. We check how much sound metal is left and whether water is reaching the plate. The answer decides between cleaning and replacement.
How a closed plate should seat
A closed plate should rest evenly on its frame, without rocking or leaving a wide gap on one side. That even contact limits air movement and stops the plate from rattling.
When the seat is uneven, the cause may be the plate, the pivots or a frame that has shifted in the masonry. We identify which, and the repair follows from it. Adjusting a pivot is a small job. A frame that has moved is a larger one, and we explain the difference before you choose.
What we check on the throat damper
- Plate, frame and pivot condition check
- Smoke shelf debris clearance
- Chimney top water source noted
- Nesting material cleared from the plate
Fireplace damper questions and answers
What if my factory-built fireplace model is no longer made?
We check the manufacturer's parts information for an approved replacement. If none exists, we explain what that means for the fireplace and the options you have. We do not adapt a listed unit to take a part it was not tested with.
What does the free inspection look at on my damper?
We check the plate, frame, pivots and control, how far the plate travels and how it seats. We also look at the smoke shelf and throat. You get the findings explained and a free written estimate.
Can a replacement control be placed where I can reach it?
Often, yes. When a control is replaced, we place it where it can be worked from the room without leaning into the firebox. The code expects the damper to be operable from the room, so that is part of the goal.
More Ways to Care for Your Fireplace
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo