
Throat dampers repaired or replaced in Home Beautiful Park
You see the failed part, the proposed repair and the price before any tool goes into the throat.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When the damper stops doing its job
- Damper stuck shut before a fire
- Handle missing or snapped off
- Insects getting in through the fireplace
- Cooled air drifting up the flue
Jump to
Fixing the damper you already have
Insects, noise and odors through an open throat
An open or missing damper leaves a direct path from the roof to the room. Insects can follow it down, and outside noise can carry through it into the room. Air drifting down the flue can also carry a sooty smell into the room.
A working damper reduces all three when it is closed. If the smell or the insects are the reason you called, tell us. We check whether the plate closes, and we look at what else may be letting air and pests in. The fix may be the damper, the top of the chimney or both, priced separately.
A damper that rattles on windy days
A plate that rattles when wind crosses the chimney top is loose in its frame or on its pivots. The noise can be an early clue that the damper is wearing, before it fails to open or close.
A rattle can come from worn pivots, a loose control rod or a plate that no longer seats. We check each of those and tighten or replace the part that moves. Tell us whether the sound happens with the plate open, closed or both. That narrows the search before the visit.
Dust and noise to expect on damper day
Freeing a stuck damper can involve scraping and tapping inside the throat. Replacing a frame can involve cutting old mortar. Both make some noise and some dust.
We cover the hearth and floor and manage dust at the opening as the work goes on. When we finish, debris and old parts are bagged and hauled away. If noise or dust would be a problem at a certain time of day, tell us and we plan the work around it. Pets that react to noise are best kept in another room.
A flashlight check you can do yourself
With the fire out and the firebox cool, shine a flashlight up past the opening. You should see the damper plate and whether it is open or closed. Move the control slowly and watch the plate follow.
If the plate does not follow the control, stays tilted or stops short, stop there and make a note. You have learned enough to describe the fault. Avoid reaching into the throat or leaning under loose debris. The rest of the check is ours to do.
What your free damper inspection covers
- Frame reset with heat-rated mortar
- Hearth and floor protection during work
- Listed parts for factory-built models
- Separate prices for any added items
Before you approve damper work
Is it safe to light a fire if the damper only opens halfway?
No. A plate that stops partway narrows the passage and tends to push smoke into the room. Leave the fireplace unused until the plate opens fully and the cause has been found and repaired.
What does the free inspection look at on my damper?
We check the plate, frame, pivots and control, how far the plate travels and how it seats. We also look at the smoke shelf and throat. You get the findings explained and a free written estimate.
What should I tell you about the damper before the visit?
Tell us what the handle does, where the plate seems to stop and whether it rattles, sticks or drops. Mention whether the fireplace is factory-built and read us the label if you can. Do not reach into the throat.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
