
Chimney damper replacement for homes in Miami Gardens
Freeing and re-hanging come before replacement, so new parts go only where the old ones cannot be kept.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper problems worth a free inspection
- Rust flakes collecting on the firebox floor
- Daylight visible past the closed plate
- Control that needs force to move
- Cooled air drifting up the flue
Jump to
Damper decisions, one part at a time
Poker controls and notched rods
A poker control is a rod or handle that hangs down at the front of the throat and hooks into notches. Pushing it moves the plate, and the notch holds the position. It is a simple design, but the notches and the hook wear with use.
If the rod slips out of its notch or will not hold a setting, tell us how it behaves. We check the rod, the notched bracket and the hook where it meets the plate. A replacement rod can often be fitted to the existing plate, which keeps the job inside the fireplace opening.
Replacing the plate and frame together
When the frame is cracked, badly warped or rusted through, a new damper assembly may be the lasting repair. The old frame comes out of the throat and a new one is set in its place. The control is chosen so it works from the room.
This is the largest version of the job, so the estimate describes it in detail. It names the assembly, the access work around the throat and any masonry that must be reset. We explain why the existing parts cannot be kept before recommending it. If a smaller repair would do, we say so.
Planning the length of a damper job
A damper that only needs freeing or a new control is often a short visit. Replacing a frame set in masonry takes longer, and the mortar around it needs time before the fireplace is used again.
We give you a realistic plan with the estimate. If a part has to be ordered, we tell you when to expect it and arrange the visit around it. If the job has to run past one day, an open throat or flue is covered at the close of each work day. That keeps debris and rain out overnight.
Nesting material resting on the damper
Twigs, leaves and nesting material on the damper plate or smoke shelf can mean an animal has used the flue. The debris can stop the plate from moving and can catch fire if a fire is lit below it.
We clear debris that blocks the damper as part of the job. If there is any sign of a living animal, removal is handled separately, following the rules that apply to the species. A screened cap at the top keeps the problem from returning, and that is priced as its own item.
Line items for a fireplace damper
- Model and serial number lookup
- Chimney top water source noted
- Nesting material cleared from the plate
- Workmanship warranty on completed damper work
Asked before damper work begins
Should the damper stay open when the fireplace is idle?
No. When there is no fire, a closed damper keeps room air from escaping and keeps outside air, insects and noise out. Open it fully before lighting and close it once the fire is out and cool.
Can I spray a lubricant on a damper that will not move?
We suggest leaving it alone. Many sprays are flammable and not made for the heat above a fire, and forcing the plate after spraying can crack the casting. Describe the fault to us and let us free it.
Will replacing the damper cure a smoky fire?
Only if the damper caused it. We check the damper's travel first. If it opens fully and smoke still spills, we explain the other possible causes and which service handles each. A working damper is not replaced to treat a draft problem.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo

