Fixing chimney stucco and its water source in Miami Gardens
Stucco repairs in Miami Gardens come with a written record of the areas, materials and coats.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When chimney stucco in Miami Gardens needs attention
- Hairline cracks across one chimney face
- Paint peeling on one chimney face
- White powder on the stucco surface
- A long crack near the roof line
Jump to
Chimney stucco, one layer at a time
Moist curing between stucco coats
Cement plaster gains strength by curing, and curing needs water. The code's plaster section calls for each coat to be kept moist for a period before the next goes on. Base coat makers describe fog curing with a fine mist for the same reason.
On a chimney repair, that means planned return trips or a schedule that allows misting between coats. We explain the curing plan when you approve the work, so the gaps between visits make sense. A patch that skips curing can craze and crack even when the mix was right.
Climbing plants and shrubs on chimney stucco
Plants that climb or rub against stucco hold moisture on the surface and can work into cracks. The National Park Service notes that unattended plant growth gradually enlarges cracks in stucco.
Keep vines off the chimney and trim shrubs back from its base where you can. If growth has already rooted into a crack, removing it may open the crack further, and we include that area in the repair. We can explain what to trim before the visit and what to leave for us.
Looking after new stucco once it is finished
Fresh stucco keeps curing for some time after the last coat. During that period it benefits from gentle treatment, and a few simple habits help the repair settle in. Most of that care is simply leaving the wall alone.
Keep sprinklers off the chimney, avoid pressure washing and leave any painting until we confirm the surface is ready. Watch the repair after the first heavy rains and tell us if you see damp patches or new cracks. An early call is easier than waiting to see whether something spreads.
The order of work on a stucco repair
A stucco repair follows a sequence, and each step depends on the one before. Water sources come first, then removal of loose plaster, then repair of the base, lath or barrier.
After that come the scratch coat, the leveling coat and the finish, each given time to cure. Paint, if it is part of the job, comes last. The estimate lists these steps in order, so you can see where each visit fits and why the work is spread out the way it is.
Stucco estimate details for Miami Gardens chimneys
- Removal of failed stucco and old patches
- Lath and fasteners in the repair area
- Leveling coat brought to the wall plane
- Full-face refinish priced as an option
Chimney stucco questions we hear in Miami Gardens
Is an elastomeric coating a good idea for a stucco chimney?
It can be, on sound stucco where the water source has been fixed. Because it forms a film, it can slow drying if water gets behind it. We read the product data and look at how the chimney dries before recommending one.
Should I pressure wash the chimney before you come?
Please do not. High pressure can drive water into cracks and loosen weak plaster, which makes the inspection harder to read. Leave the surface as it is, and we will look at it in its current condition.
Do you replace the metal lath or reuse it?
Sound lath that has only pulled away can often be refastened. Corroded or torn lath in the repair area is cut out and replaced with corrosion-resistant lath lapped into what remains. The estimate says which we expect to do.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo