Chimney damper replacement for homes in Plantation
When the damper is not the cause of the smoke, we tell you so before quoting a single part.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damper trouble that shows at the handle
- Daylight visible past the closed plate
- Crank turns without moving the plate
- Damp debris resting on the smoke shelf
- Plate hanging crooked in its frame
Jump to
Damper repairs and replacements for Plantation
Replacing only the handle or rod
Sometimes the plate and frame are sound and only the control has failed. A bent rod, a snapped handle or a stripped crank can be replaced on its own. That keeps the work at the front of the throat and leaves the masonry alone.
We match the replacement control to the plate you have, since controls are not interchangeable across every design. Where the exact part is not available, we explain the nearest suitable option and how it will attach. The estimate lists the control as its own line, so you can see that nothing else is being replaced.
Letting new mortar cure before a fire
Where a damper frame is set in new mortar, that mortar needs time to dry before it meets heat. Heat-resistant fireplace mortars come with drying and curing instructions from their makers. Some call for a period of air drying and then small fires to finish the cure.
We explain the waiting time and the steps for returning the fireplace to use. Following the product instructions protects the joint around the new frame. A large fire too soon can crack fresh mortar and loosen the work you just paid for.
What a damper inspection cannot see
A damper sits in a tight space, and some of its parts are hidden from view. The back of the frame, where it meets the masonry, is one example. The underside of a stuck plate is another.
We tell you what we could see and what we could not. If a hidden condition could change the job, we say so in the estimate and explain what would happen if it appears. That way the plan already covers the likely surprise, and nothing is added without your approval.
A frame that has worked loose
Over time, the mortar that holds a damper frame in the throat can break down. A loose frame shifts when the plate moves, and the plate then closes unevenly or binds partway.
Resetting a loose frame means cleaning out the old joint and setting the frame again with a mortar suited to the heat. Where the frame is sound, it can often be reused. We explain whether the frame can stay and how much masonry work around it is needed before any joint is opened.
The damper scope we write down
- Frame reset with heat-rated mortar
- Seat check with the plate closed
- Written record of the damper work
- Separate prices for any added items
Asked before damper work begins
Is it safe to light a fire if the damper only opens halfway?
No. A plate that stops partway narrows the passage and tends to push smoke into the room. Leave the fireplace unused until the plate opens fully and the cause has been found and repaired.
What does the free inspection look at on my damper?
We check the plate, frame, pivots and control, how far the plate travels and how it seats. We also look at the smoke shelf and throat. You get the findings explained and a free written estimate.
Should I close the damper while embers are still glowing?
No. Leave the damper open until the fire is out and the firebox has cooled. Glowing embers still give off smoke and gases, and those need the open flue to leave the house.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo