Chimney inspection for homes in Davie
No repair package decided in advance, only findings from your chimney and choices that follow from them.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Reasons to have the chimney inspected
- A smell from the fireplace after rain
- A house sale or purchase underway
- Roof work finished around the chimney
- Scorch marks near the fireplace opening
Jump to
Inspecting your chimney in Davie, part by part
Checking the lintel above the opening
Above the fireplace opening, a lintel carries the masonry over the gap. Heat and water can rust a steel lintel or crack the masonry around it. A sagging line above the opening or cracks running up from its corners are worth a close look.
We look at the lintel where it can be seen and at the brick or stone around it. If the lintel is concealed behind a finish, we say so. Repair of a failing lintel is a separate job, and we explain whether it limits use of the fireplace.
What an attic view adds to the inspection
If the chimney passes through an attic, that space can show things the roof and firebox cannot. We look for water stains on framing, clearances between the chimney and wood, and the condition of the chimney where it crosses the roof deck.
Tell us how to reach the attic and whether the opening is clear. We do not move stored belongings without asking. If the attic cannot be entered safely, we note it and explain what that leaves unconfirmed. Where it helps, a return visit for the attic alone can be arranged.
Paint or coatings on chimney masonry
Some chimneys have been painted or given a film-forming coating. BIA guidance on coatings for brick warns that films can trap moisture in the masonry. Peeling, blistering or stained paint on a chimney can be a sign of that.
We note the coating and its condition and look for damage beneath it where it has failed. Removing or replacing a coating is a separate job. We explain whether the coating is part of the problem or simply cosmetic. Adding another coating over a failing one is not something we would suggest.
Concealed construction around the fireplace
Parts of a fireplace are built to be hidden. Fireblocking around the chimney, the framing clearances inside walls and the base of a factory-built unit behind its finish are examples. The code sets how they are built, but they cannot be seen once the room is finished.
An inspection does not open finished surfaces. We say which concealed parts are relevant to your question and what signs of trouble we looked for around them. If those signs are present, we explain what opening up would involve before anything is disturbed.
The inspection scope agreed at the start
- Damper operation and seal
- Each flue matched to its appliance
- Chimney height relative to the roof
- Signs of animals or nesting
Common questions about chimney checks
Is an inspection the same as a chimney cleaning?
No. The inspection evaluates the chimney and fireplace. A cleaning removes deposits. If heavy soot hides the lining, we may suggest cleaning before the lining can be judged, and we say whether that would change your decision.
Do I have to use you for the repairs?
No. The inspection and any repair are separate decisions. The estimate is yours to keep and compare. Should you book it with us inside 72 hours of your free inspection, a 10% discount applies.
Is a quick look from the ground enough?
It can spot a missing cap, a leaning stack or loose brick. It cannot show cracks in the crown, gaps in the flashing or the condition of the lining. We tell you what a ground view could not confirm.
More Ways to Care for Your Fireplace
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo