Chimney inspection in Hallandale Beach, explained at the hearth
Recommended work you approve no later than 72 hours after your free inspection comes with 10% off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What prompts a fireplace inspection
- Roof work finished around the chimney
- Flaking brick faces on the chimney
- Cracks in the wall beside the fireplace
- Rust stains running down the chimney
Jump to
What happens during a chimney check
Checking clearances to combustible materials
Chimneys and fireplaces must keep a gap between hot surfaces and anything that can burn. The Florida Building Code's chimney and fireplace sections set those clearances. Wood trim near the opening and framing around the chimney both count, and anything stored close by deserves the same caution.
We look at the clearances we can see, such as trim around the opening and framing visible in an attic. Clearances inside finished walls are usually concealed, and we say so. Where a visible clearance looks short, we explain the concern and the options.
What an attic view adds to the inspection
If the chimney passes through an attic, that space can show things the roof and firebox cannot. We look for water stains on framing, clearances between the chimney and wood, and the condition of the chimney where it crosses the roof deck.
Tell us how to reach the attic and whether the opening is clear. We do not move stored belongings without asking. If the attic cannot be entered safely, we note it and explain what that leaves unconfirmed. Where it helps, a return visit for the attic alone can be arranged.
Inspecting a decorative fireplace that stays unlit
Some fireplaces go unlit and serve only as a feature of the room. The chimney above them still faces rain, sun and animals. Water entering through an unprotected top can damage the masonry and the room below.
An inspection of a decorative fireplace focuses on the top, the damper and signs of water. We also check whether the flue is closed off in a way that suits a fireplace that is not used. If you might light it one day, we explain what would need checking first.
How the building code fits an existing chimney
The Florida Building Code sets how chimneys and fireplaces are built. An existing chimney is judged for its condition and safe use. Where something differs from what the code describes, we tell you and explain why it matters.
Not every difference means the chimney must be rebuilt. Some affect safety directly and some do not. We explain the practical effect of each one, so you can decide what to correct and when. The written record keeps the two kinds apart, so the urgent items do not get lost among the minor ones.
Parts checked during your inspection
- Lintel above the fireplace opening
- Chimney height relative to the roof
- Top-mounted damper and cable
- Flue size compared with the opening
Chimney inspection questions asked in Hallandale Beach
Can you find where water is getting into the chimney?
Usually. We look at the crown, cap, flashing and masonry with the timing of the water in mind. When looking alone is not enough, a hose water test can narrow it down when the job calls for it.
What happens if you find an animal in the chimney?
We stop before anything is disturbed. Some species and active nests are protected, so the next step may be a wait, a referral or an animal removal visit. The entry point is noted for repair once the flue is empty.
Does the inspection include looking at the flue lining?
Yes, along the length that can be seen from each end. We note cracks, open joints, missing sections and heat damage, and we say how far the view reached.
More Ways to Care for Your Fireplace
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo