Chimney inspection for a home sale in North Golf Estates
Upfront pricing, no hidden fees and time to ask about every line of the estimate.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What prompts a fireplace inspection
- A missing or loose chimney cap
- Roof work finished around the chimney
- A chimney that seems to lean
- Cracks in the wall beside the fireplace
Jump to
What happens during a chimney check
Inspecting when smoke comes into the room
Smoke in the room is a sign that the chimney is not carrying it away as it should. Stop using the fireplace until the cause is known. The problem may be a blockage, a damper that does not open fully or a flue that is too small or too cold.
We look at each possible cause and tell you which the evidence supports. Some are simple to put right and some are not. The estimate explains the fix that matches the cause rather than trying several things at once.
Approving repairs after your free inspection
The free inspection gives you an estimate for anything we suggest. Take time to read it and ask about each line.
Work you approve within 72 hours of that free inspection gets a 10% discount. The hours are counted from your own inspection, and the discount covers any service on the estimate that you book inside that window. The amount is shown before you decide. There is no need to decide at the hearth, and no pressure to book everything at once.
What a view from the ground can show
Some chimney problems are visible from the ground: a leaning stack, a missing cap, loose brick or heavy staining. Others, such as cracks in the crown or gaps in the flashing, usually need a closer view.
A quick look from the ground is not the same as an inspection. When we can reach the top, we do. When we cannot, we tell you what the ground view showed and what it left unknown. That way a short look is not mistaken for a full one.
Fireplace inspection and chimney inspection together
Some people ask for a fireplace inspection and some for a chimney inspection, but the two are hard to separate. The fireplace and the chimney above it work together, and a fault in one shows up in the other.
Our inspection covers both unless you ask us to focus on one part. The written record lists the fireplace findings and the chimney findings under their own headings, so you can see where each problem sits. A fault in the fireplace is not blamed on the chimney, or the reverse, without evidence.
Parts checked during your inspection
- Cap, screen and fasteners
- Signs of water entry inside and out
- Deposits and blockages in the flue
- Concealed parts named as concealed
Chimney safety inspection questions
Do you inspect factory-built fireplaces too?
Yes. We look for the listing label and the model, check the panels, firebox, damper and visible chimney sections, and compare them with the manual. Repairs have to use the manufacturer's listed parts.
Can you find where water is getting into the chimney?
Usually. We look at the crown, cap, flashing and masonry with the timing of the water in mind. When looking alone is not enough, a hose water test can narrow it down when the job calls for it.
Does the inspection include looking at the flue lining?
Yes, along the length that can be seen from each end. We note cracks, open joints, missing sections and heat damage, and we say how far the view reached.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo