Chimney inspection that starts with your question in Pembroke Park
Know what is sound, what needs repair and what could not be seen before you approve anything.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney inspection makes sense
- Pieces of tile in the firebox
- A missing or loose chimney cap
- Scorch marks near the fireplace opening
- Rust stains running down the chimney
Jump to
From hearth to crown, the inspection explained
White deposits on the chimney masonry
A white, powdery deposit on brick or mortar usually means water has moved through the masonry and left minerals behind as it dried. BIA technical guidance explains that this efflorescence forms when water carries salts to the surface, and that it is usually not harmful in itself. It tells us water is getting in somewhere.
We note where the deposits appear and look for the water path above them. The crown, cap, flashing and mortar joints are the usual suspects. Cleaning the deposits off without fixing the water path only means they return.
Rust on metal parts of the chimney
Rust on the damper, lintel, cap or chase cover tells us water has been reaching that part. The rust itself can weaken the metal until it fails. Rust stains running down the chimney face come from the same source.
We note each rusted part and how far the rust has gone. The estimate addresses the part and, where possible, the water that caused it. Replacing a rusted part without stopping the water only delays the next failure. We explain which comes first when both are needed.
Repairs approved after an inspection in Pembroke Park
An inspection at your home in Pembroke Park costs nothing. When it finds work worth doing, each item is priced on a written estimate with no hidden fees.
Anything from that estimate you book inside 72 hours of your free inspection carries a 10% discount. The time runs from your own inspection, so there is no need to rush a decision on the day. Ask us to go through the numbers with you before you choose. The discount covers any service from the estimate, not only the largest item.
When access limits the inspection
Some visits run into limits: a roof that cannot be walked, an attic that cannot be reached safely, an insert that blocks the view. We work around them where possible and are clear about them where not.
The written record lists each limit and what it left unconfirmed. If a limit affects your decision, we explain what it would take to remove it, such as a return visit or moving equipment. We also say what that would cost. A limit is a fact about the visit, not a finding about the chimney, and we keep the two apart.
What an inspection visit includes
- Mortar joints on each reachable face
- Listing label on a factory-built unit
- Written record of what was inspected
- Free written estimate for any work
What people ask before an inspection
Can you find where water is getting into the chimney?
Usually. We look at the crown, cap, flashing and masonry with the timing of the water in mind. When looking alone is not enough, a hose water test can narrow it down when the job calls for it.
Do you inspect the attic around the chimney?
When the chimney passes through an attic that can be entered safely, yes. It can show water stains on framing and clearances that cannot be seen from the roof or the room.
Does the inspection include looking at the flue lining?
Yes, along the length that can be seen from each end. We note cracks, open joints, missing sections and heat damage, and we say how far the view reached.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo