Chimney inspection in Riverland Village, explained at the hearth
Recommended work you approve no later than 72 hours after your free inspection comes with 10% off.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a chimney inspection makes sense
- Pieces of tile in the firebox
- White deposits on the chimney brick
- A missing or loose chimney cap
- A chimney that seems to lean
Jump to
Our approach to a fireplace inspection
Looking into the smoke chamber
Above the damper, the smoke chamber slopes inward to meet the flue. Its walls should be smooth enough to guide smoke upward. Rough, stepped or cracked walls hold deposits and can let heat reach the surrounding masonry.
We look at the chamber from below with a strong light and describe its shape and surface. If parging or other repair is advisable, it goes on the estimate as a separate line. If the chamber looks sound, the written record says that too.
Signs of movement in the chimney structure
A chimney that leans, pulls away from the house wall or shows long diagonal cracks may be moving. Loose courses of brick at the top and gaps where the chimney meets the siding are other signs.
We describe what we see and how far it extends. Movement can have several causes, and some need a deeper look than a free inspection can give. We explain what we can conclude, what we cannot and what the next step would be. Until the cause is known, keep people and belongings clear of any loose masonry at the top.
How we look at parts you cannot see
Most of an inspection relies on a strong light, a mirror where the angle allows, and access from the firebox, the roof and any attic. We also feel for loose parts and work anything that moves, such as the damper.
These methods show the surfaces that can be reached. They do not see through masonry or behind finishes. We are clear about that limit, so a finding is not stated more strongly than the evidence supports. If a finding depends on a part we could not see, the record says that too.
Outside air inlets serving the fireplace
Some fireplaces draw combustion air through an inlet from outside, with its own small damper or grille. The Florida Building Code's chimney and fireplace chapter includes a section on exterior air supply. If an inlet exists, it needs to be clear and working.
We look for the inlet inside the firebox or hearth and outside the house where it can be found. Blocked grilles, missing screens and stuck dampers are noted. If an inlet was covered over during later work, we explain what that may change.
Inspection scope for homes in Riverland Village
- Crown condition at the chimney top
- Each flue matched to its appliance
- Hose water test where the job needs it
- Flue size compared with the opening
Before you arrange a chimney inspection
Is the initial chimney inspection really free?
Yes. The initial inspection of the accessible parts, the findings explained on site and a written estimate for any work cost nothing. Further investigation, such as pulling an insert, is a separate choice with its own price.
Can you inspect the chimney for a house sale?
Yes. Tell us what the buyer or seller needs to know and any deadline. The scope is agreed at the start. Findings are explained and written down, and repairs come with a free written estimate.
What happens if you find an animal in the chimney?
We stop before anything is disturbed. Some species and active nests are protected, so the next step may be a wait, a referral or an animal removal visit. The entry point is noted for repair once the flue is empty.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo