A chimney leak traced and repaired in Surfside
Small leaks caught early usually mean small repairs, and we say when something can safely wait.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Water marks that suggest a chimney leak
- Rust flakes on the firebox floor
- Grit or mortar crumbs on the hearth
- Damper that has started to stick
- Leak that began after roof work
Jump to
Stopping a chimney leak at the right part
Why not to seal it yourself first
It is tempting to reach for a tube of caulk or a can of coating when a chimney leaks. Surface products applied without knowing the path often miss it. Worse, they can hide the evidence we would use to find the real opening.
If you have already sealed something, that is fine, but tell us what and where. Products on the masonry or roof junction change how the surface behaves. Knowing what was applied helps us read the chimney correctly and avoid blaming the wrong part.
Arranging a leak visit in Surfside
To arrange a leak visit in Surfside, phone us or send the form with a note on where the water shows up. Mention whether it is dripping now or appears only in some storms. We then book the free inspection at a time that suits you.
If the leak is active on the day, leave some of it in place for us to see. A wet patch, a drip line or a damp firebox is useful evidence. We will still leave the area as dry and clean as we found it, apart from what the leak itself has done.
When a coating was tried first
Some leaks are treated first with a coating on the brick. If the water kept coming, the coating probably missed the path. Water-repellent treatments reduce absorption, but they do not close cracks, open joints or gaps at the top and the roof line.
Tell us what was applied and when. We check whether the coating is hiding anything or trapping water. The findings then focus on the path the coating did not reach. Any future treatment is a separate decision, made after the physical repair.
Water on the hearth or firebox floor
Water pooling on the hearth or the firebox floor usually comes down the flue. The top of the chimney is the first place to look. It may be an open flue, a damaged cap or a gap around the liner at the crown.
Wipe up the water but leave any debris that came with it, such as grit or flakes of rust. Those pieces help show where the water has been. We check the top and the smoke shelf during the inspection. The fix belongs to the part at the top that let the water in.
Leak details settled before you approve
- Symptom history and leak log review
- Cap and flue opening at the top
- Open chimney covered each work day
- Hidden damage flagged for assessment
Plain answers about leaking chimneys
Do you test the chimney with a hose on each visit?
No. We run one only when the job calls for it, usually when the evidence points to a few possible paths and a test would separate them. We explain why before we start and protect the room where water may appear.
Can a missing cap let rain reach the firebox?
Yes. An uncovered flue lets rain fall straight onto the smoke shelf, the damper and the firebox floor. Rust flakes and wet debris there are typical signs. The cap work is quoted as its own item once the top is confirmed as the path.
Can you show me the part that caused the leak?
Yes, if the repair removes it. Ask before the work starts and we set the old piece aside for you to look at. The written record also describes what we found when it came off.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo