Finding the chimney leak and fixing it in West Perrine
Your leak history, the roof, the attic and the firebox are read together before any repair is proposed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What a leaking chimney looks like indoors
- Powdery white residue on the brick
- Dripping sounds inside the chimney in rain
- Leak that appears only in strong wind
- Water marks returning after a patch
Jump to
Our leak work for chimneys in West Perrine
Brick faces that flake or crumble
When brick stays wet for long periods, its face can start to flake away. Flakes collecting in gutters or around the foot of the chimney may be a sign of it. The damage tells you the masonry has been taking in more water than it can dry out.
We look at where the flaking is worst. It often marks the face that takes the most weather or a spot where water runs down from a failed top. The brick repair is priced as its own item, and the estimate explains the water source it depends on.
Watching the next heavy rain
After a leak repair, the best test is the next heavy rain. Check the stain you marked in pencil, the attic and the fireplace during and after it. If nothing new appears, that is a good sign.
One dry storm is encouraging, but a leak that appeared only with wind from one direction needs that wind to be tested. Keep an eye on it through a few different storms. If water appears again, tell us promptly, and keep the evidence in place for us to see.
Standing water behind the damper
The smoke shelf sits behind the damper, at the bottom of the space where the flue begins. Rain coming down the flue often collects there. Debris on the shelf can hold water and let it soak into the masonry around the fireplace.
We check the shelf during the inspection if it can be reached through the damper. Standing water or wet debris there points strongly at the top of the chimney. Cleaning the shelf is a simple step, but the source of the water still needs its own repair.
Accessible parts and concealed parts
An inspection can judge the parts it can reach. The top of the chimney, the exposed masonry, the roof junction, the attic framing and the firebox can be seen directly. The inside of walls, the space behind finishes and the underside of roofing cannot.
Our findings separate what we saw from what we inferred. Where a conclusion depends on something concealed, we say so. If opening an area would settle the question, we explain what that involves and let you decide whether it is worth doing.
What we look at before quoting leak repair
- Chase cover and storm collar
- Temporary protection listed on its own
- Interior restoration left to its trade
- Ground and irrigation sources ruled out
Leak questions answered for West Perrine
Where does water usually get into a leaking chimney?
The usual entry points are the top of the flue, a cracked crown, the roof junction, the masonry faces and, on framed chimneys, the chase cover. Where the water shows inside gives a first clue, and the inspection confirms which part is responsible.
What should I have ready when you come to look at the leak?
Your notes on when water appeared, pencil marks on stains, a clear path to the attic hatch and any papers from earlier chimney or roof work. Debris that fell into the firebox is useful evidence too.
What if you cannot find where the water gets in?
We say so plainly and list the paths that remain possible, with the evidence for each. You can choose a targeted repair on the most likely one, knowing the risk, or wait for more evidence from the next storms.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo