Listed chimney liners installed in West Perrine
A relining plan that shows the size, the listing and the route, with nothing added until you approve it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Liner warning signs worth a closer look
- An inspection note about the flue lining
- Smoke spilling at the appliance door
- Two appliances sharing one chimney
- Water reaching the appliance from above
Jump to
The liner work behind a sound flue in West Perrine
Sizing starts with the appliance manual
A liner is sized to the appliance it serves, not to the opening at the top of the chimney. The DuraLiner instructions, for example, say the liner shall be no smaller than the size the appliance manufacturer specifies. Other listed systems carry similar wording in their own manuals.
That is why we ask for the make and model before we quote. With the appliance manual in hand, the required flue size becomes a documented figure rather than an estimate. If the manual is missing, we look for the model label on the unit and work from the published instructions.
Narrow damper areas and liner shape
The damper area of a masonry fireplace can be narrower than the flue above it. Some liner systems offer oval sections or adapters to pass through a tight throat. Whether one fits depends on the actual opening and the system's own sizing table.
We measure that area during the assessment, because it can decide whether the liner passes at all. If the damper frame blocks the route, removing it may be necessary, and that is a separate line. We describe the change to the fireplace before you approve it.
A new liner still needs cleaning
A liner gives flue gases a sound passage, but it does not stop deposits from forming. Burning wood still leaves residue on the inside of the pipe. The DuraLiner manual includes maintenance guidance for that reason, with advice on inspection and cleaning.
Keep the liner's instructions with the appliance manual and follow them. Maintenance visits from our team can include the liner, the cap and the top plate. The manual also warns against relying on chemical cleaners in place of mechanical cleaning, and we follow that advice.
What insulation around a liner does
Insulation around a liner keeps flue gases warmer on their way up and can reduce heat reaching the chimney walls. Some listings rely on insulation to meet clearance or temperature requirements. In those cases it is not optional.
The DuraLiner instructions, for example, require insulation above a certain point on flexible pipe and recommend it along the full run. We follow the requirements of the liner we install and explain them. The estimate states which parts of the run are insulated and why. If an insulated system is proposed, the manual shows the reason.
The flue relining scope at a glance
- Glazed deposit removal where found
- Damper plate removal where required
- Room protection at the fireplace opening
- Support method for the liner run
Questions to settle before relining
Will the chimney be left open overnight during relining?
No. Before leaving each day we close off the open chimney top against rain and debris. Inside, the fireplace area is protected and cleaned, and debris is hauled away when the work is done.
Does relining change how my chimney looks from outside?
Usually only the top changes, where the top plate and the liner cap sit above the crown. If a wall connection is involved, the tee opening is finished and sealed. We describe any visible change in the estimate before work starts.
Can a liner help if my fireplace has weak draft?
It can when the problem is an oversized, damaged or unlined flue. Draft also depends on the opening, the chimney height and other factors. We explain what the inspection finds and do not promise a liner will cure every draft issue.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo