Repairing cracked chimney brickwork in Hillsboro Pines

We look at the brick, the joints and the water path together, then repair them in the right order.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Call Now (645) 465-4171 Book Online

Chimney masonry damage you can see

Mortar that crumbles when touched
Faces flaking off individual bricks
A crack running through several bricks
Stains on the attic side of the chimney

Jump to

Chimney masonry from the roof line down

Framing too close to chimney masonry

The Florida Building Code keeps combustible materials a set distance from a masonry chimney and requires fireblocking where it passes floors and ceilings. Renovation work sometimes brings framing, trim or insulation right up against the masonry.

We look for that during attic and interior checks. Correcting a clearance problem may involve another trade, and we explain what it means for using the fireplace. The finding is listed separately from the masonry repair, so it does not get lost in a long estimate.

Joints near the flue and the fire

Masonry close to the flue and the fireplace takes heat as well as weather. The brick industry's chimney guidance recommends heat-resistant mortar for bedding flue liners, and repairs that reach the liner bedding follow that advice.

When repairs reach masonry that meets the flue lining, we choose materials for the heat they will face. Masonry inside the firebox belongs to fireplace work rather than the chimney masonry scope. We tell you where our masonry repair ends and which service covers what lies beyond it.

Judging a mortar color match once it dries

Fresh mortar looks darker while wet and lightens as it dries. A match that looks right on the day can look wrong once it has dried. The brick industry advises comparing samples with the existing mortar both wet and fully dry.

Where appearance matters, we prepare small samples and let them dry before you judge them. Weathered joints carry years of dirt and wear, so the new work may still read slightly fresher at first. We tell you what to expect before any joint is filled, so the result does not come as a surprise.

Cutting out a damaged brick

Replacing a single brick starts with breaking it out and cutting away the mortar around it. The brick industry's guidance stresses doing this without damaging the adjacent units, then cleaning the opening of dust and debris.

The care taken at this step decides whether the repair stays small. Rough removal can crack the bricks next door and turn one unit into several. We work from the damaged brick outward and stop at sound material. Any extra damage found during removal is shown to you before the scope changes.

What the masonry visit can include

Color sample for new mortar
Access equipment and roof protection
Debris removal and haul-away
Curing care for fresh mortar

Before you approve masonry repairs

Do you need to go on the roof for chimney masonry work?

For work above the roof line, usually yes. We plan the route and protection so the roof covering takes as little wear as possible, and we tell you if a roofer needs to lift any covering.

What if a crack in my chimney looks structural?

Cracks through several bricks, stepped cracking or a stack moving away from the house can point to a structural cause. We explain what we see and when an engineer should assess it before masonry repair.

Can masonry repairs go ahead in wet weather?

Fresh mortar needs protection from heavy rain while it sets. We plan the work around the weather, cover open work at the end of each day and move a step when conditions call for it.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo