Partial or full-height chimney rebuilds in Bay Harbor Islands
We take the damaged section down to sound masonry and rebuild it with a new top and flashing tie-in.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney problems that call for rebuilding
- Loose bricks through several top courses
- A stack that has tipped out of plumb
- Mortar washed out deep in the joints
- Flue tiles showing through open joints
Jump to
Rebuilding from sound masonry upward
Keeping the stack's shape where it meets the roof
Close to a floor, ceiling or roof crossing, the code keeps a chimney wall and its flue lining at one size and shape. The rule covers a short zone just above and just below each crossing.
When a rebuild starts near the roof line, we keep the new courses in line with the masonry below through that zone. Any decorative change in the top's shape comes higher up, where the code allows it. The estimate describes the shape of the rebuilt top in words.
Why the new crown has a drip edge
Water running off a crown will follow its underside back to the brick unless something stops it. A drip edge breaks that path and makes water fall clear of the chimney face.
A drip edge is written into the code's description of a masonry chimney's top. On a rebuild, it is formed into the new crown along each overhanging edge. We mention it because it is invisible from the ground, yet it decides whether the new courses stay dry. A crown without one tends to leave a dark band of wet brick just under its edge.
Metal parts that resist corrosion
A rebuild brings together several metal parts: ties, flashing, the cap and its fasteners. The brick industry's guidance calls for corrosion-resistant metals in flashing and caps, since replacing them later means disturbing the new masonry.
We choose metals for each part and name them on the estimate. Metals that will touch each other are chosen to sit well together, or separated. That keeps a sound rebuild from being let down by a rusting part years later. Where you have a preference, such as copper for appearance, tell us and we explain how it would work with the other metals.
Your approval before any removal
Nothing is taken down until you approve the rebuild scope. Once masonry is removed it cannot be put back, so this is the most important approval point in the project.
Take the time you need. Compare quotes, ask questions and, where the damage suggests it, get a structural opinion first. When you approve, the agreed scope becomes the reference for the job. Any change after that comes back to you as a separate item, priced and explained. Approving part of the work, such as the make-safe step alone, is also an option.
What a chimney rebuild estimate lists
- Dismantling to sound masonry
- Clay flue tiles set as courses rise
- New crown with drip edge and bond break
- Top height checked against the code
Chimney reconstruction questions answered
Will the rebuilt chimney need to be taller than before?
Only if the old top fell short of the Florida Building Code's height rule for chimneys. We check it against the roof and nearby parts of the house and explain any change before you approve.
When can the fireplace be used after the rebuild?
Once the new mortar and crown have cured. The waiting time depends on the materials and the manufacturer's instructions, and we give you the timing in the written record of the work.
How do you keep debris off the roof and the yard?
Masonry is taken down by hand and lowered in a controlled way. We protect the roof covering and the ground below, clean up as we go and haul all of the debris away at the end.
More Ways to Care for Your Fireplace
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo