
Chimney rebuilding for homes in Tamiami
We take the damaged section down to sound masonry and rebuild it with a new top and flashing tie-in.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a rebuild enters the conversation
- Flue tiles showing through open joints
- Daylight through the masonry in the attic
- Stepped cracks down the stack
- Water pouring in around the chimney
Jump to
Chimney rebuild work at homes in Tamiami
Rebuilding before a new roof goes on
If a roof replacement is planned, the chimney rebuild should usually come first. The new courses, counterflashing and crown can then be finished before the new covering is laid around the base.
Doing it the other way round means disturbing new roofing to reach the chimney. Tell us the roofer's timing and scope. We agree the order with them, so the flashing layers are built in the right sequence and the junction closes once. That also keeps each trade's part of the junction clearly separate.
When two metals touch
Two different metals in contact, in the presence of water, can corrode faster than either would alone. On a chimney, that can happen where new flashing meets an old cap, where a fastener differs from the sheet it holds or where copper meets galvanized steel.
We look at which metals will stay on the chimney and which are new, and choose parts that are compatible. Where two metals must meet, we separate them. The estimate lists the metal for each part, so the choice can be checked.
A chimney separating from the house
A gap between chimney and house that widens toward the top suggests the stack is moving away from the building. Failed ties, a settling base or a loose upper section can all cause it.
We look at the attachment, the base and the crack pattern before suggesting a rebuild. If the cause is in the footing or the structure, an engineer's assessment may need to come first. A rebuild then restores the upper stack and ties it back to the house properly.
Questions to ask before approving a rebuild
Ask where the removal will stop and how that line was chosen. Ask how the flue will be lined, what the crown will be made of and whether the new top meets the code's height rule.
Ask who handles the roof covering and flashing, how the house and yard will be protected and how changes are priced if removal uncovers more. Clear answers to those questions tell you whether a rebuild estimate has been thought through. We welcome those questions on the visit and answer them in writing on request.
Steps a full rebuild may add
- Top height checked against the code
- Fireplace opening sealed during removal
- Sample panel for brick and mortar
- Uncovered damage shown before the scope grows
Chimney reconstruction questions answered
Can you reuse the original bricks?
Where they are sound, yes. We clean the old mortar off and check each unit for cracks and broken faces. Damaged bricks are replaced with new or salvaged units chosen to match the courses that stay.
Is there a discount if I book the rebuild soon?
Yes. Once the free inspection at your home is done, you have 72 hours in which any service you book carries a 10% discount. The rebuild scope stays exactly as written either way.
What happens to a furnace vent in the chimney during a rebuild?
If a furnace or water heater vents into the chimney, it has to be shut down or disconnected while the flue is open. We plan that step with a heating or plumbing contractor and include it in the schedule.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
