Rebuilding the chimney above the roofline in Twin Lakes North
Where repairs keep failing, we explain whether rebuilding the section is the sounder choice.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a partial rebuild may be needed
- Loose bricks through several top courses
- Broken brick spread over large areas
- Flue tiles showing through open joints
- Daylight through the masonry in the attic
Jump to
Rebuilding the stack with the flue in mind
Rebuild work inside the attic
When a rebuild goes below the roof line, part of the work happens inside the attic. That means access through a hatch or opening, dust control and protection for insulation and anything stored nearby.
Tell us where the attic access is and what is stored around the chimney. We plan the route for materials and debris and protect the rooms below. The attic side of the rebuild is listed on the estimate, so the effort is visible rather than hidden in the masonry line.
Access equipment for a rebuild
Rebuilding means working at height for several days with heavy material. Depending on the chimney's height and the roof, that calls for roof staging or scaffolding set against the house.
Access is listed as its own item on the estimate, since it can be a meaningful part of the cost. We plan where equipment stands and how it is protected, and tell you which doors, paths or parking areas will be affected while it is up. Staging stays in place only as long as the work needs it and comes down before the final cleanup.
A damaged lining found below the rebuild
Removing the top of a chimney gives a clear view of the flue lining below the rebuild line. Sometimes that view shows cracked or missing tiles that could not be seen before.
If that happens, we stop and show you what we found. Repairing or relining the lower flue is a separate decision, with its own price. We explain how it affects the rebuild, since it is simpler to line the whole flue while the top is open than to come back later.
Keeping clear of a failing stack
A chimney with loose courses or a shifted top can shed masonry without warning, especially in wind. Keep children, pets and visitors away from the ground below it, and avoid parking there.
Do not try to pull loose bricks off or brace the stack yourself. Tell us where pieces have landed and how large they were when you call. That information shapes how quickly the visit is arranged and how the area is protected. A top that sways or has visibly slipped counts as urgent, so say so at the start of the call.
Steps a full rebuild may add
- Removal boundary marked and agreed
- Clearance to framing at roof and attic
- Shoulders laid to shed water
- Sample panel for brick and mortar
Chimney reconstruction questions answered
Who handles the roof and flashing during a rebuild?
We set new counterflashing into the courses as they go up. The base flashing and roof covering around the chimney are coordinated with your roofer where needed, and the estimate says who does which part.
Can a chimney that has moved away from the house be rebuilt?
Often, but the reason it moved has to be understood first. We look at the base, the attachment and the crack pattern, and we explain what should be assessed before a rebuild is priced.
Will a rebuild change how my fireplace draws?
It should not make it worse. The rebuilt flue is kept to a size that suits the fireplace, and the top follows the code's height rule. If draft was a problem before, we explain what the rebuild can and cannot change.
More Ways to Care for Your Fireplace
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo