Chimney and roof repair at homes in Lauderdale Lakes
A free inspection comes first, then a written estimate that separates each damaged part from the next.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Marks that point to chimney damage
- Damp patches near the fireplace wall
- A stack that leans away from the roof
- Cracks that look wider than before
- Water dripping onto the damper
Jump to
Chimney damage repair, one part at a time
White deposits on the chimney face
A white powder or crust on brick is usually efflorescence. It forms when water moving through the masonry carries dissolved salts to the surface and then evaporates. The deposit itself is mostly cosmetic, but it shows that water is traveling through the chimney.
Cleaning it off without stopping the water only buys time, because the deposit returns once the masonry gets wet again. We trace the source first, which may be the crown, the cap, a joint or the roof junction. After the cause is fixed and the brick has dried, gentle cleaning usually removes what remains.
A widening gap between chimney and wall
Look along the side of the chimney where it meets the house. A narrow, even line of sealant is normal. A gap that widens toward the top, or a chimney that seems to tilt outward, is a different matter and deserves prompt attention.
Keep people and pets away from the area under the chimney while the cause is unknown. Tell us when you first noticed the gap and whether it has changed. We assess the attachment, the footing where we can see it and the top of the stack. If the findings point to movement, chimney rebuild may be part of the discussion.
Separating a roof leak from a chimney leak
Water near a chimney may not come from the chimney at all. Damaged roof covering close by, a valley that carries water toward the chimney or a failed vent boot can produce a stain in the same place.
We look at the roof around the chimney as well as the chimney itself. If the evidence points to the roof, we say so and suggest a roofer rather than selling chimney work that would not stop the leak. Where both play a part, each item is listed and priced separately.
Cleaning chimney brick without harming it
Stains, mortar smears and deposits can often be cleaned from brick. Harsh chemicals and high water pressure, though, can etch the faces, open the joints and drive water into the wall. The brick industry's cleaning guidance calls for testing a small area before cleaning a whole wall.
We choose the gentlest method that works for the stain and the brick, and we try it on a small patch first. You see the test result before the rest is cleaned. If the stain comes from a water problem, the source is fixed before cleaning.
How chimney damage repairs are itemized
- Crown crack sealing or recasting
- Loose masonry made safe
- Attic-side look around the chimney
- Connected appliance vent noted and protected
Your chimney damage questions
Can you tell whether water comes from the chimney or the roof?
Often, yes. We look at the flashing, the top of the chimney and the roof covering nearby. Where the source is still unclear, a hose water test on one area at a time can separate them.
When would an engineer need to look at my chimney?
Signs such as cracks running through several bricks, stepped cracking, a stack pulling away from the house or widespread broken brick can point to a structural cause. We tell you when that assessment should come before repair.
Can you repair a chimney that also vents a furnace or water heater?
Yes, with planning. If the repair would interrupt that vent, the appliance may need a heating or plumbing contractor to disconnect and reconnect it, and we build that step into the schedule.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo