Chimney restoration, planned part by part, in Wynwood
We look at the whole chimney, then repair only the parts that need it, with your approval at each step.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney damage you can spot from the yard
- Rust streaks down the chimney face
- A gap between chimney and house wall
- A damper that sticks or will not close
- Soft siding around a framed chase
Jump to
Chimney damage explained before it is repaired
Bringing an idle chimney back into use
A chimney that has stood unused can collect debris, nests and water damage without anyone noticing. Before the fireplace is used again, the flue, the top and the roof junction should be checked for what has changed during the quiet period.
Tell us how long the fireplace has been idle and whether anything was done to close it off. We look for blockages, loose masonry and signs of water. The estimate separates what must be fixed before use from work that can reasonably wait until later.
How fuel and fire habits affect the chimney
Burning damp or unseasoned wood produces more smoke, and smoke leaves more deposits in the flue. The EPA's wood-burning guidance recommends dry wood and small, hot fires over smoldering ones.
Your habits do not cause every problem, but they help explain some of what we find. Tell us what you burn and how often. If deposits are heavy, cleaning may have to come before the lining can be judged, and that step sits on the estimate as its own item.
Why a pressure washer is not a chimney tool
A pressure washer can strip loose mortar, scar soft brick and force water deep into joints and cracks. On a chimney, that water can reach the inside of the flue or the house framing behind it.
If someone has pressure-washed your chimney recently, mention it when you book. We look for eroded joints and damaged faces that may date from it. Where cleaning is needed, we use low-pressure methods tested on a small area first. Damaged joints are repointed before any cleaning of the surrounding brick goes ahead.
A flat metal top that holds water
On a framed chase, the metal cover on top should shed water off its edges. A flat or sagging cover lets water pool, and pooled water rusts the metal and finds its way down through seams and fastener holes.
Rust streaks down the chase and staining inside are common results. We check the shape, the seams and the storm collar around the flue pipe. Chase cover replacement handles a new cover, while damage to the enclosure below is priced as a separate repair.
Chimney restoration items you approve
- Listed replacement parts for metal chimneys
- Roof access and roof covering protection
- Written record of the completed work
- Attic-side look around the chimney
Chimney damage repair questions answered
What happens during the free inspection for chimney damage?
We look at the accessible parts, from the fireplace opening to the top of the chimney, and connect what you noticed with the part behind it. You hear the findings on site, then receive a written estimate that lists each repair separately.
Do I need to know which part is damaged before I call?
No. Describe what you saw, where you saw it and when it started. A stain, a fallen piece of brick or a loose cap is enough for us to plan the visit and bring the right equipment.
What happens to the old brick, mortar and metal?
We clean up as the work goes and haul the debris away when the job is done. Broken masonry, old metal and packaging leave the property with us rather than in your bins.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo