Chimney waterproofing, planned around your brick, in Lauderdale West
Tell us how the brick behaves after rain, and we plan the assessment in Lauderdale West around it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the chimney brick is taking on water
- Brick that stays dark long after rain
- Damp patch on the chimney breast indoors
- Damp lower courses near the ground
- A sealing quote with no product named
Jump to
Our waterproofing approach, one step at a time
Moisture from inside the chimney
Some chimney dampness comes from inside rather than from rain. Moisture can form in a flue when warm exhaust meets cool masonry, and water can rise from the ground into the base of an outside chimney. A repellent on the outside does not fix either.
In fact, slowing drying through the outer face can make an inside moisture problem worse. We look for the signs of it, such as staining high on the inside of the flue or damp low on the chimney near the ground. If the moisture is coming from within, the answer is a different repair.
Deciding which faces to treat
Every face of a chimney above the roof sees weather, but not equally. One face may take most of the wind-driven rain, while another stays sheltered. The estimate can include all faces or only those that need it.
On a chimney in Lauderdale West, we look for which faces absorb water most, such as the ones that stay dark longest after rain. Treating the whole stack gives an even appearance and even protection. Treating only some faces may cost less. We explain both options, and the estimate lists the faces included.
Rain falling down the flue
Treating the faces of a chimney does nothing for rain that falls straight down the flue. That water lands on the damper and firebox and can soak the masonry from the inside. A cap over the flue is what keeps it out.
We check the top as part of every waterproofing assessment. If the flue is open or the cap is damaged, we list it as its own item. There is little point protecting the faces while rain pours into the middle of the chimney.
Questions to raise at the visit in Lauderdale West
A waterproofing visit in Lauderdale West is a good time to ask anything you are unsure about. It helps to have your questions ready, such as whether the brick really needs treatment and what should be repaired first.
You might also ask how the product will look, how long preparation will take and what happens if it rains. We answer each in plain words. If a question needs checking, such as how an old coating will behave, we tell you how we will find out.
Preparation items listed before sealing
- Hairline separations along joint edges
- Roof junction flashing condition
- Roofing and metal parts covered
- Workmanship warranty on the application
Chimney sealing questions, answered
How will I know if the treatment is still working?
Look at the chimney during and after rain. Treated faces should shed water and dry evenly. If a face darkens and holds water again, the treatment may be fading or something else has changed. A maintenance visit can check it and the parts it depends on.
Can one face be treated without doing the whole chimney?
Yes, where only some faces absorb too much water. Treating the whole stack gives an even look and even protection, while treating the worst faces may cost less. The estimate lists the faces included, and the test area shows how each one responds.
Will the treated brick still let moisture out?
With a breathable repellent, yes. It keeps most liquid water from soaking in while letting water vapor leave through the face. That matters on a chimney, because moisture reaches the masonry from inside as well, and a sealing film could hold it in.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo