Chimney waterproofing that lets the brick breathe in Leisure City
Glass, roofing, metal and plants near the chimney are covered before any product goes on.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Waterproofing warning signs we look for in Leisure City
- Sandy mortar washing out of joints
- Hairline gaps between brick and mortar
- Damp lower courses near the ground
- Water beading on one face but not another
Jump to
Chimney waterproofing in Leisure City, from repairs to repellent
Broken and flaking brick goes first
Brick with cracked or flaking faces lets water straight in, and a repellent cannot seal it. Brick industry guidance lists replacing such units among the repairs that should come before any clear coating.
We mark the damaged bricks during the inspection and list their replacement as a separate item. The treatment is then planned for the sound masonry that remains. If most of a face is damaged, we say so, because a larger masonry repair changes whether treatment makes sense at all.
Finishes that go on before treatment
Product data warns that some cementitious finishes, plaster and stucco may not bond well to a treated surface. If any such finish is planned for the chimney, it should go on first and be allowed to cure.
Tell us about any plans for patching, parging or refinishing. We sequence the work so the repellent comes last. If a repair uses a cement-based product, we allow for its cure before treatment. The estimate shows that order, so no step works against another.
An honest answer on treatment in Leisure City
Not every chimney in Leisure City needs waterproofing, and we will not pretend otherwise. Some need repairs and nothing more. Some need repairs and then a repellent. A few need no work at all for now.
The free inspection is how we find out which applies to yours. We explain what we saw on each face, what the top and the roof junction are doing and whether the brick is absorbing more water than it should. The recommendation follows from that, and the choice is yours.
Deciding when to renew a treatment
Whether a treatment needs renewing is best judged by how the brick behaves, not by a fixed interval. If water still beads and runs off after rain, the treatment is still working. If the faces darken and hold water again, it is fading.
We can check this on a maintenance visit, sometimes by wetting a small area to see how it responds. If renewal makes sense, the same preparation applies, including any repairs. The written record from the first treatment tells us what product is already on the brick.
Preparation items listed before sealing
- Brick faces checked for flaking or cracks
- Cap or open flue noted at the top
- Repairs listed ahead of the treatment
- Changes after the test priced separately
Chimney sealing questions, answered
Does waterproofing cover the inside of the flue or the firebox?
No. The treatment goes on the outside masonry only. The flue, smoke chamber and firebox face heat and combustion gases rather than rain, and masonry repellents are not made for that exposure. Interior problems belong to a different service, and we can note what we see.
Can you waterproof a chimney built from concrete block?
Sometimes. Block differs from brick, and some repellents that suit brick are not recommended for block. Where the block is painted or finished in stucco, a clear repellent may not fit at all. We match the product to the masonry or explain why none suits it.
Will the treated brick still let moisture out?
With a breathable repellent, yes. It keeps most liquid water from soaking in while letting water vapor leave through the face. That matters on a chimney, because moisture reaches the masonry from inside as well, and a sealing film could hold it in.
More Ways to Care for Your Fireplace
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo