Firebox rebuilds and joint repair in West Perrine
Book the firebox work within 72 hours of your free inspection and it carries a 10% discount.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Firebox problems to mention when you call
- Rust streaks on the upper back wall
- Soft, sandy mortar in the joints
- Thick, lumpy joints from past repairs
- A loose ash dump frame
Jump to
How we repair a worn firebox
Why ordinary mortar fails inside a firebox
Mortars in the fire chamber meet high surface heat and combustion gases. Brick industry guidance explains that refractory mortar, based on fireclay, is made for those conditions and has to be used in thin joints. General-purpose mortar and cement patching compounds break down far sooner there.
That is why a firebox repair names its mortar. When we find joints filled with the wrong material, we explain what it is doing and why it has to come out. Refilling over it simply seals a weak layer behind a new face.
How repaired joints will look
Refractory mortars come in a limited range of colors, often gray, buff or black. New joints may look different from old ones that have darkened with use.
If the firebox is on show, ask about color before the repair. We choose from what suits the product and the firebox, and explain how the joints will change as they season. Performance comes first, but color is worth a moment of discussion when it is a free choice. Color choices do not override the product the firebox needs; they are made within it.
Booking a firebox repair visit
Same-day inspection is available when the schedule allows. Otherwise we set a time that suits you and let you know how to prepare the firebox. Mention anything about access, parking or pets when you book.
If the repair needs firebrick or a product we do not carry that day, we explain the wait and schedule the work visit once materials are in hand. You approve the materials before they are ordered, and we tell you whether the fireplace can be used in the meantime.
Can the fireplace be used before the firebox repair
It depends on what we find. Hairline lines and minor surface wear usually do not stop use. Missing units, loose bricks, open joints that show the backing or pieces falling during fires do. Using a firebox with gaps in its lining puts heat where the fireplace was not built to take it.
We give a direct answer for your firebox on the visit and explain the reason. If the answer is no, a note on the fireplace helps everyone in the house remember until the repair is done. If the answer is yes, we tell you what to watch for until the repair date.
Firebox repair lines you approve
- Lining type identified
- Ash dump frame reset where present
- Mortar cleaned from brick faces
- Damper or leak items listed separately
Firebox repair, the questions people ask
How do I know if my firebox has firebrick or panels?
Firebrick shows real joints between separate units. Panels are larger pieces, often with a brick pattern molded in, and usually sit in factory-built units. We confirm the lining on the visit, because each type follows a different repair route.
Does firebox repair include sweeping the chimney?
No. Sweeping is its own service. When the chimney is due for cleaning, doing it before the firebox repair keeps soot and debris off the fresh joints, and we tell you when that order makes sense.
Can the brick face around the opening be repaired at the same time?
Often, yes, as a separate line. The face uses different brick and mortar from the firebox, so it is repaired by its own rules. We keep the two apart on the estimate so you can see what each involves.
More Ways to Care for Your Fireplace
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo