Your masonry fireplace, fitted with a wood insert in Davie
Tell us about the fireplace you have. We explain whether it can host a wood insert and what that would involve.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Conditions we see before an insert goes in
- A worn insert with a warped door
- Soot on the face above the opening
- A faceplate that no longer seals
- No floor protection in front of the unit
Jump to
Turning a masonry fireplace into a wood insert host
Liner size comes from the insert manual
The liner diameter is not a matter of preference. Liner instructions say it must be no smaller than the size the appliance maker specifies, and the insert manual gives that size. A mismatched liner can upset the draft the insert was designed around.
We confirm the collar size on the insert you choose and match the liner to it. If your masonry flue is too tight for the required liner, we explain the options before anything is ordered. The size is written into the estimate so it can be checked.
Power for the optional blower
Many inserts offer a blower that pushes warm air into the room. It plugs into a grounded outlet, and manuals point to the electrical code for grounding. The manual also shows which side of the unit the cord runs to.
If there is no suitable outlet near the fireplace, an electrician adds one as a separate item. We coordinate the location with the electrician so it suits the manual. You approve that work alongside the insert. Tell us if you want the blower now or later, because adding the outlet is easier before the faceplate goes on.
The first fire after the job is complete
Manuals describe the first fire as coming after the installation is complete and, where required, inspected by the local authority. Before that fire, the owner should understand the air control and the loading steps. Rushing the first fire leaves questions unanswered.
We finish the installation, complete the handover and answer your questions before you light it. If a building or fire official needs to see the work, we explain when that happens. The first fire is then yours to enjoy with the manual in hand.
Manufactured logs and fire starters
According to EPA guidance, plenty of wax and sawdust logs are intended only for open hearth fireplaces. It tells owners to read the insert's instructions before burning artificial logs. Insert manuals often limit fuel to natural wood. The label and manual settle the question for your model.
We explain what your manual says about fire starters and manufactured logs. Natural fire starters and dry kindling are the usual approach. Liquid accelerants such as gasoline or lighter fluid do not belong in any wood insert, whatever the label says about other fuels.
The insert checklist behind your estimate in Davie
- Liner insulation where instructions require
- Side wall and facing clearances
- Debris cleanup and haul-away
- Separate pricing for insert and liner
Wood insert installation, in questions and answers
What happens to the damper when the insert goes in?
If the damper control will be out of reach, manuals require the damper to be removed or fixed open so the liner can pass. We explain which applies to your fireplace, and the change is noted in your written record.
Will my existing hearth be large enough for an insert?
It depends on the model and how high it sits. Manuals set the size and thermal rating of the floor protection in front of the unit. We measure your hearth and explain whether it can stay, needs extending or needs added protection.
Why does the new insert smell during its early fires?
The high-temperature paint cures during the break-in fires and gives off an odor, which manuals describe as expected. Keep those fires moderate, ventilate the room and set nothing on top of the insert until the curing is done.
More Ways to Care for Your Fireplace
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo